ath79: add support for tl-wr1043nd v2/v3

[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / qca9557.dtsi

diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi
index 60585523724d9b6e9ba92009fd4d5b64e73fb19c..3600d69cab417e40162b2aea96d64a2408505a01 100644 (file)
--- a/target/linux/ath79/dts/qca9557.dtsi
+++ b/target/linux/ath79/dts/qca9557.dtsi
@@ -14,12 +14,19 @@
 
                cpu@0 {
                        device_type = "cpu";
-                       compatible = "mips,mips24Kc";
+                       compatible = "mips,mips74Kc";
                        clocks = <&pll ATH79_CLK_CPU>;
                        reg = <0>;
                };
        };
 
+       extosc: ref {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-output-names = "ref";
+               clock-frequency = <40000000>;
+       };
+
        ahb {
                apb {
                        ddr_ctrl: memory-controller@18000000 {
@@ -46,6 +53,28 @@
                                status = "disabled";
                        };
 
+                       usb_phy0: usb-phy@18030000 {
+                               compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+
+                               reset-names = "usb-phy", "usb-suspend-override";
+                               resets = <&rst 4>, <&rst 3>;
+
+                               #phy-cells = <0>;
+
+                               status = "disabled";
+                       };
+
+                       usb_phy1: usb-phy {
+                               compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+
+                               reset-names = "usb-phy", "usb-suspend-override";
+                               resets = <&rst2 4>, <&rst2 3>;
+
+                               #phy-cells = <0>;
+
+                               status = "disabled";
+                       };
+
                        gpio: gpio@18040000 {
                                compatible = "qca,ar9557-gpio",
                                                "qca,ar9340-gpio";
@@ -81,10 +110,12 @@
                        pll: pll-controller@18050000 {
                                compatible = "qca,ar9557-pll",
                                                "qca,qca9550-pll";
-                               reg = <0x18050000 0x20>;
+                               reg = <0x18050000 0x50>;
 
                                #clock-cells = <1>;
                                clock-output-names = "cpu", "ddr", "ahb";
+
+                               clocks = <&extosc>;
                        };
 
                        wdt: wdt@18060008 {
@@ -98,7 +129,7 @@
                        };
 
                        rst: reset-controller@1806001c {
-                               compatible = "qca,ar9557-reset",
+                               compatible = "qca,qca9550-reset",
                                                "qca,ar7100-reset",
                                                 "simple-bus";
                                reg = <0x1806001c 0x4>;
@@ -106,18 +137,6 @@
                                #reset-cells = <1>;
                                interrupt-parent = <&cpuintc>;
 
-                               intc2: interrupt-controller@2 {
-                                       compatible = "qcom,qca9556-intc";
-
-                                       interrupts = <2>;
-
-                                       interrupt-controller;
-                                       #interrupt-cells = <1>;
-
-                                       qcom,pending-bits = <0x1f0>,    /* pcie rc1 */
-                                                           <0xf>;      /* wmac */
-                               };
-
                                intc3: interrupt-controller@3 {
                                        compatible = "qcom,qca9556-intc";
 
@@ -126,35 +145,90 @@
                                        interrupt-controller;
                                        #interrupt-cells = <1>;
 
-                                       qcom,pending-bits = <0x1f000>,          /* pcie rc2 */
+                                       qcom,pending-bits = <0x1f000>,          /* pcie rc */
                                                            <0x1000000>,        /* usb1 */
                                                            <0x10000000>;       /* usb2 */
                                };
                        };
 
-                       pcie0: pcie-controller@180c0000 {
+                       rst2: reset-controller@180600c0 {
+                               compatible = "qca,qca9550-reset",
+                                               "qca,ar7100-reset",
+                                                "simple-bus";
+                               reg = <0x180600c0 0x4>;
+
+                               #reset-cells = <1>;
+                       };
+
+                       pcie: pcie-controller@18250000 {
                                compatible = "qcom,ar7240-pci";
                                #address-cells = <3>;
                                #size-cells = <2>;
                                bus-range = <0x0 0x0>;
-                               reg = <0x180c0000 0x1000>, /* CRP */
-                                     <0x180f0000 0x100>,  /* CTRL */
-                                     <0x14000000 0x1000>; /* CFG */
+                               reg = <0x18250000 0x1000>, /* CRP */
+                                     <0x18280000 0x100>,  /* CTRL */
+                                     <0x16000000 0x1000>; /* CFG */
                                reg-names = "crp_base", "ctrl_base", "cfg_base";
-                               ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000        /* pci memory */
+                               ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000        /* pci memory */
                                          0x1000000 0 0x00000000 0x0000000 0 0x000001>;         /* io space */
-                               interrupt-parent = <&intc2>;
+                               interrupt-parent = <&intc3>;
                                interrupts = <0>;
 
                                interrupt-controller;
                                #interrupt-cells = <1>;
 
                                interrupt-map-mask = <0 0 0 1>;
-                               interrupt-map = <0 0 0 0 &pcie0 0>;
+                               interrupt-map = <0 0 0 0 &pcie 0>;
+                               status = "disabled";
+                       };
+
+                       wmac: wmac@18100000 {
+                               compatible = "qca,qca9550-wmac";
+                               reg = <0x18100000 0x10000>;
+
+                               interrupt-parent = <&cpuintc>;
+                               interrupts = <2>;
+
                                status = "disabled";
                        };
                };
 
+               usb0: usb@1b000000 {
+                       compatible = "generic-ehci";
+                       reg = <0x1b000000 0x1fc>;
+
+                       interrupt-parent = <&intc3>;
+                       interrupts = <1>;
+                       resets = <&rst 5>;
+                       reset-names = "usb-host";
+
+                       has-transaction-translator;
+                       caps-offset = <0x100>;
+
+                       phy-names = "usb-phy0";
+                       phys = <&usb_phy0>;
+
+                       status = "disabled";
+               };
+
+               usb1: usb@1b400000 {
+                       compatible = "generic-ehci";
+                       reg = <0x1b400000 0x1fc>;
+
+                       interrupt-parent = <&intc3>;
+                       interrupts = <2>;
+                       resets = <&rst2 5>;
+                       reset-names = "usb-host";
+
+                       has-transaction-translator;
+                       caps-offset = <0x100>;
+
+                       phy-names = "usb-phy1";
+                       phys = <&usb_phy1>;
+
+                       status = "disabled";
+       };
+
                spi: spi@1f000000 {
                        compatible = "qca,ar9557-spi", "qca,ar7100-spi";
                        reg = <0x1f000000 0x10>;