if (!priv->chip_data)
return -ENOMEM;
- if (priv->phy->dev.of_node)
- ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
+ if (priv->phy->mdio.dev.of_node)
+ ret = ar8327_hw_config_of(priv, priv->phy->mdio.dev.of_node);
else
ret = ar8327_hw_config_pdata(priv,
- priv->phy->dev.platform_data);
+ priv->phy->mdio.dev.platform_data);
if (ret)
return ret;
t = pvid << AR8327_PORT_VLAN0_DEF_SVID_S;
t |= pvid << AR8327_PORT_VLAN0_DEF_CVID_S;
+ if (priv->vlan && priv->port_vlan_prio[port]) {
+ u32 prio = priv->port_vlan_prio[port];
+
+ t |= prio << AR8327_PORT_VLAN0_DEF_SPRI_S;
+ t |= prio << AR8327_PORT_VLAN0_DEF_CPRI_S;
+ }
ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);
t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
t |= egress << AR8327_PORT_VLAN1_OUT_MODE_S;
+ if (priv->vlan && priv->port_vlan_prio[port])
+ t |= AR8327_PORT_VLAN1_VLAN_PRI_PROP;
+
ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);
t = members;
{
int timeout = 20;
- while (ar8xxx_mii_read32(priv, r2, r1) & AR8327_ATU_FUNC_BUSY && --timeout)
- udelay(10);
+ while (ar8xxx_mii_read32(priv, r2, r1) & AR8327_ATU_FUNC_BUSY && --timeout) {
+ udelay(10);
+ cond_resched();
+ }
if (!timeout)
pr_err("ar8327: timeout waiting for atu to become ready\n");
}
-#if 0
static void ar8327_get_arl_entry(struct ar8xxx_priv *priv,
struct arl_entry *a, u32 *status, enum arl_op op)
{
break;
}
}
-#endif
static int
ar8327_sw_hw_apply(struct switch_dev *dev)
return 0;
}
+static int
+ar8327_sw_set_port_vlan_prio(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+ int port = val->port_vlan;
+
+ if (port >= dev->ports)
+ return -EINVAL;
+ if (port == 0 || port == 6)
+ return -EOPNOTSUPP;
+ if (val->value.i < 0 || val->value.i > 7)
+ return -EINVAL;
+
+ priv->port_vlan_prio[port] = val->value.i;
+
+ return 0;
+}
+
+static int
+ar8327_sw_get_port_vlan_prio(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+ int port = val->port_vlan;
+
+ val->value.i = priv->port_vlan_prio[port];
+
+ return 0;
+}
+
static const struct switch_attr ar8327_sw_attr_globals[] = {
{
.type = SWITCH_TYPE_INT,
.set = ar8xxx_sw_set_mirror_source_port,
.get = ar8xxx_sw_get_mirror_source_port,
.max = AR8327_NUM_PORTS - 1
- },
+ },
{
.type = SWITCH_TYPE_INT,
.name = "arl_age_time",
.get = ar8327_sw_get_port_igmp_snooping,
.max = 1
},
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "vlan_prio",
+ .description = "Port VLAN default priority (VLAN PCP) (0-7)",
+ .set = ar8327_sw_set_port_vlan_prio,
+ .get = ar8327_sw_get_port_vlan_prio,
+ .max = 7,
+ },
};
static const struct switch_dev_ops ar8327_sw_ops = {
.apply_config = ar8327_sw_hw_apply,
.reset_switch = ar8xxx_sw_reset_switch,
.get_port_link = ar8xxx_sw_get_port_link,
+/* The following op is disabled as it hogs the CPU and degrades performance.
+ An implementation has been attempted in 4d8a66d but reading MIB data is slow
+ on ar8xxx switches.
+
+ The high CPU load has been traced down to the ar8xxx_reg_wait() call in
+ ar8xxx_mib_op(), which has to usleep_range() till the MIB busy flag set by
+ the request to update the MIB counter is cleared. */
+#if 0
+ .get_port_stats = ar8xxx_sw_get_port_stats,
+#endif
};
const struct ar8xxx_chip ar8327_chip = {
.vtu_load_vlan = ar8327_vtu_load_vlan,
.phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
-#if 0
.get_arl_entry = ar8327_get_arl_entry,
-#endif
.sw_hw_apply = ar8327_sw_hw_apply,
.num_mibs = ARRAY_SIZE(ar8236_mibs),
.vtu_load_vlan = ar8327_vtu_load_vlan,
.phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
-#if 0
.get_arl_entry = ar8327_get_arl_entry,
-#endif
.sw_hw_apply = ar8327_sw_hw_apply,
.num_mibs = ARRAY_SIZE(ar8236_mibs),