ipq806x: refresh dtsi patches

[openwrt/staging/wigyori.git] / target / linux / ipq806x / patches-5.10 / 082-ipq8064-dtsi-tweaks.patch

diff --git a/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch b/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
index 568ca5bb883e2feb735e0a294a5dc1ca1e557c3e..9c16ee43510e42430c18fbd799abdb57fed8bb4d 100644 (file)
--- a/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
+++ b/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -20,7 +20,7 @@
+@@ -20,9 +20,9 @@
                #address-cells = <1>;
                #size-cells = <0>;
  
@@ -9,7 +9,9 @@
                        compatible = "qcom,krait";
                        enable-method = "qcom,kpss-acc-v1";
                        device_type = "cpu";
-@@ -30,7 +30,7 @@
+                       reg = <1>;
+                       next-level-cache = <&L2>;
+@@ -30,9 +30,9 @@
                        qcom,saw = <&saw0>;
                };
  
@@ -18,6 +20,8 @@
                        compatible = "qcom,krait";
                        enable-method = "qcom,kpss-acc-v1";
                        device_type = "cpu";
+                       reg = <1>;
+                       next-level-cache = <&L2>;
 @@ -67,7 +67,7 @@
                        no-map;
                };
@@ -27,6 +31,14 @@
                        reg = <0x41000000 0x200000>;
                        no-map;
                };
+@@ -128,6 +128,7 @@
+                       gpio-ranges = <&qcom_pinmux 0 0 69>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
++                      #address-cells = <0>;
+                       #interrupt-cells = <2>;
+                       interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ 
 @@ -155,6 +155,7 @@
                                        function = "pcie3_rst";
                                        drive-strength = <12>;
@@ -35,6 +47,14 @@
                                };
                        };
  
+@@ -190,6 +190,7 @@
+               intc: interrupt-controller@2000000 {
+                       compatible = "qcom,msm-qgic2";
+                       interrupt-controller;
++                      #address-cells = <0>;
+                       #interrupt-cells = <3>;
+                       reg = <0x02000000 0x1000>,
+                             <0x02002000 0x1000>;
 @@ -219,21 +220,23 @@
                acc0: clock-controller@2088000 {
                        compatible = "qcom,kpss-acc-v1";
@@ -88,11 +108,43 @@
                        compatible = "qcom,ipq806x-ahci", "generic-ahci";
                        reg = <0x29000000 0x180>;
  
-@@ -430,6 +433,7 @@
+@@ -430,6 +430,16 @@ qfprom: qfprom@700000 {
+                       reg = <0x00700000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
++
++                      tsens_calib: calib@400 {
++                              reg = <0x400 0xb>;
++                      };
++                      tsens_backup: backup@410 {
++                              reg = <0x410 0xb>;
++                      };
++                      speedbin_efuse: speedbin@0c0 {
++                              reg = <0x0c0 0x4>;
++                      };
+               };
+ 
+               gcc: clock-controller@900000 {
+@@ -437,9 +447,21 @@ gcc: clock-controller@900000 {
+ 
+               gcc: clock-controller@900000 {
+-                      compatible = "qcom,gcc-ipq8064";
++                      compatible = "qcom,gcc-ipq8064", "syscon";
                        reg = <0x00900000 0x4000>;
                        #clock-cells = <1>;
                        #reset-cells = <1>;
 +                      #power-domain-cells = <1>;
++
++                      tsens: thermal-sensor@900000 {
++                              compatible = "qcom,ipq8064-tsens";
++
++                              nvmem-cells = <&tsens_calib>, <&tsens_backup>;
++                              nvmem-cell-names = "calib", "calib_backup";
++                              interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
++                              interrupt-names = "uplow";
++                              #thermal-sensor-cells = <1>;
++                              #qcom,sensors = <11>;
++                      };
                };
  
                tcsr: syscon@1a400000 {