lantiq: add support for AVM FRITZ!Box 7412
[openwrt/staging/wigyori.git] / target / linux / lantiq / base-files / etc / board.d / 02_network
index 6ab5cb9..b7d23da 100755 (executable)
@@ -12,146 +12,222 @@ board_config_update
 vpi=1
 vci=32
 annex="a"
+tone="av"
+xfer_mode=""
 encaps="llc"
 payload="bridged"
 lan_mac=""
 wan_mac=""
-interface_wan=""
+interface_wan="dsl0"
 
-board=$(lantiq_board_name)
+board=$(board_name)
 
 case "$board" in
-ACMP252|GIGASX76X)
+audiocodes,mp-252)
        ucidef_add_switch "switch0" \
                "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
        ;;
 
-ARV4510PW)
+allnet,all0333cj)
+       annex="b"
+       lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
+arcadyan,arv4510pw)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
                "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
        ;;
 
-ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
+arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
        ucidef_add_switch "switch0" \
                "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
        ;;
 
-ARV4520PW)
+arcadyan,arv4520pw)
+       annex="b"
        ucidef_add_switch "switch0" \
                "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
        ;;
 
-ARV7506PW11)
+arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
+       annex="b"
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
+arcadyan,arv7506pw11)
+       annex="b"
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
        ucidef_add_switch "switch0" \
                "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
        ;;
 
-ARV7519PW)
+arcadyan,arv7519pw)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
        ucidef_add_switch "switch0" \
                "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
        ;;
 
-ARV7519RW22)
+arcadyan,arv7519rw22)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
        ;;
 
-BTHOMEHUBV2B)
+arcadyan,arv752dpw22|arcadyan,arv8539pw22)
+       annex="b"
+       ucidef_add_switch "switch0" \
+               "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+       ;;
+
+alphanetworks,asl56026)
+       lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+       wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
+       ucidef_add_switch "switch0"\
+               "2:lan" "3:lan" "6t@eth0"
+       ;;
+
+bt,homehub-v2b)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
        ;;
 
-BTHOMEHUBV3A)
+bt,homehub-v3a)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_set_interface_lan 'eth0'
        ;;
 
-BTHOMEHUBV5A)
+bt,homehub-v5a)
        lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
-               "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
+               "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
-DGN3500*)
+netgear,dgn1000b)
+       annex="b"
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
+netgear,dgn3500|netgear,dgn3500b)
+       lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
                "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
        ;;
 
-EASY80920NAND|EASY80920NOR)
+netgear,dm200)
+       lan_mac=$(mtd_get_mac_binary ART 0)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
+lantiq,easy80920-nand|lantiq,easy80920-nor)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
                "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
-FRITZ7360SL)
+avm,fritz3370-rev2-hynix|\
+avm,fritz3370-rev2-micron)
+       annex="b"
+       lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
+       wan_mac=$(macaddr_add "$lan_mac" 3)
+       ucidef_add_switch "switch0" \
+               "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
+       ;;
+
+avm,fritz7312|\
+avm,fritz7320)
+       annex="b"
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
+avm,fritz7360sl)
+       annex="b"
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
        ;;
 
-H201L)
+avm,fritz7412)
+       tffsdev=$(find_mtd_chardev "nand-tffs")
+       annex="b"
+       lan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n maca)
+       wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl)
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
+siemens,gigaset-sx76x)
+       annex="b"
+       ucidef_add_switch "switch0" \
+               "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+       ;;
+
+zte,h201l)
+       annex="b"
        ucidef_add_switch "switch0" \
                "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
        ;;
 
-P2601HNFX)
+zyxel,p-2601hn)
        ucidef_add_switch "switch0" \
                "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
        ;;
 
-P2812HNUF*)
+zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
        lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
+               "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
        ;;
 
-TDW8970|TDW8980)
+tplink,tdw8970|tplink,tdw8980)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
        ;;
 
-VG3503J)
+arcadyan,vg3503j)
        lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
-               "2:lan:1" "4:lan:2" "6t@eth0"
+               "2:lan:2" "4:lan:1" "6t@eth0"
        ;;
 
-VR200v)
+tplink,vr200|tplink,vr200v)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
        ucidef_add_switch "switch0" \
                "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
        ;;
 
-VGV7510KW22*)
+arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
+       annex="b"
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
        ucidef_add_switch "switch0" \
-               "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
+               "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
        ;;
 
-VGV7519*)
+arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
        wan_mac=$(mtd_get_mac_binary board_config 22)
        ucidef_add_switch "switch0" \
-               "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
+               "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
-WBMR)
+buffalo,wbmr-hp-g300h)
        ucidef_add_switch "switch0" \
                "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
        ;;
 
-WBMR300)
+buffalo,wbmr-300hpd)
        lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
        wan_mac="$lan_mac"
        ucidef_add_switch "switch0" \
@@ -164,15 +240,12 @@ WBMR300)
 
 esac
 
-if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
-       ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
-fi
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
+       ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
 
-if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
-       interface_wan="ptm0"
-       ucidef_add_vdsl_modem "$annex" "av" "ptm"
+if lantiq_is_vdsl_system; then
+       ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
 else
-       interface_wan="nas0"
        ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 fi