#
-# Copyright (C) 2012-2015 OpenWrt.org
+# Copyright (C) 2012-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-project.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
+DEVICE_VARS += BOOT_SCRIPT UBOOT
KERNEL_LOADADDR := 0x00008000
-DEVICE_VARS += KERNEL_SIZE
-
-define Build/dtb
- $(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
-endef
-
-define Build/clearfog-bundle
- rm -f $@.new
- $(TAR) -cp --numeric-owner --owner=0 --group=0 --sort=name \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- --file=$@.new -C $(TARGET_DIR)/ .
- $(TAR) -rp --numeric-owner --owner=0 --group=0 --sort=name \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- --file=$@.new -C $(dir $(IMAGE_KERNEL)) $(notdir $(IMAGE_KERNEL)) $(notdir $(IMAGE_KERNEL).dtb)
- gzip -9n -c $@.new > $@
-endef
-
-# SD-Card Images:
-# these values are optimized for a 4GB labeled sdcard that actually holds 7744512 sectors of 512 byte
-# MBR: 2048 sectors
-# Partition 1: 32768 sectors
-# Partition 2: 98304 sectors (configurable)
-# Partition 3: 7611392 sectors (configurable, depends on p2 size)
-
define Build/boot-scr
- rm -f $@.bootscript
- mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d boot.script $@.bootscript
+ rm -f $@-boot.scr
+ sed \
+ -e 's#@ROOT@#$(IMG_PART_SIGNATURE)#g' \
+ -e 's#@DTB@#$(firstword $(DEVICE_DTS))#g' \
+ $(BOOT_SCRIPT).bootscript > $@-new.bootscript
+ mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d $@-new.bootscript $@-boot.scr
endef
define Build/boot-img
rm -f $@.boot
- mkfs.fat -C $@.boot 16384
- $(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::$(dts).dtb)
- mcopy -i $@.boot $(IMAGE_KERNEL) ::zImage
- mcopy -i $@.boot $@.bootscript ::boot.scr
+ mkfs.fat -C $@.boot $$(( $(CONFIG_TARGET_KERNEL_PARTSIZE) * 1024 ))
+ $(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(KDIR)/image-$(dts).dtb ::$(dts).dtb;)
+ mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_NAME)
+ -mcopy -i $@.boot $@-boot.scr ::boot.scr
+endef
+
+define Build/boot-img-ext4
+ rm -fR $@.boot
+ mkdir -p $@.boot
+ $(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
+ $(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
+ -$(CP) $@-boot.scr $@.boot/boot.scr
+ make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M $@.bootimg $@.boot
+endef
+
+define Build/buffalo-kernel-jffs2
+ rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
+ mkdir -p $(KDIR)/kernel_jffs2
+ dd if=/dev/zero of=$@.fakerd bs=131008 count=1 conv=sync
+ $(STAGING_DIR_HOST)/bin/mkimage \
+ -T ramdisk -A $(LINUX_KARCH) -O linux -C gzip -n 'fake initrd' \
+ -d $@.fakerd $(KDIR)/kernel_jffs2/initrd.buffalo
+ cp $@ $(KDIR)/kernel_jffs2/uImage.buffalo
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --little-endian -v --squash-uids -q -f -n -x lzma -x rtime -m none \
+ --eraseblock=128KiB --pad=$(KERNEL_SIZE) -d $(KDIR)/kernel_jffs2 -o $@
+ rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
endef
define Build/sdcard-img
- rm -rf $@ $@.rootfsdata $@.tmp
- mkdir -p $@.tmp
- ROOTFS_SIZE=$$(( $(CONFIG_TARGET_ROOTFS_PARTSIZE) * 1024 * 2 )); \
- DATA_SIZE=$$(( 7709696 - ($(CONFIG_TARGET_ROOTFS_PARTSIZE) * 1024 * 2) )); \
- make_ext4fs -J -l $$DATA_SIZE $@.rootfsdata $@.tmp && \
- ./gen_mvebu_sdcard_img.sh 7744512 $@ \
- "$(BIN_DIR)/uboot-mvebu-clearfog/openwrt-mvebu-clearfog-u-boot-spl.kwb" \
- c 32768 $@.boot \
- 83 $$ROOTFS_SIZE $(IMAGE_ROOTFS) \
- 83 $$DATA_SIZE $@.rootfsdata
+ SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ ./gen_mvebu_sdcard_img.sh $@ \
+ $(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+ c $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+ 83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
+endef
+
+define Build/sdcard-img-ext4
+ SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ ./gen_mvebu_sdcard_img.sh $@ \
+ $(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+ 83 $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.bootimg \
+ 83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
+endef
+
+define Build/omnia-medkit-initramfs
+ $(TAR) -c -T /dev/null -f $@
+ rm -rf $(dir $(IMAGE_KERNEL))boot
+ mkdir -p $(dir $(IMAGE_KERNEL))boot/boot/
+ cp $(KDIR)/zImage-initramfs $(dir $(IMAGE_KERNEL))boot/boot/zImage
+ cp $(KDIR)/image-$(DEVICE_DTS).dtb $(dir $(IMAGE_KERNEL))boot/boot/dtb
+ $(TAR) -rp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ --file=$@ -C $(dir $(IMAGE_KERNEL))boot/ .
+endef
+
+define Build/uDPU-firmware
+ (rm -fR $@-fw; mkdir -p $@-fw)
+ $(CP) $(BIN_DIR)/$(IMAGE_PREFIX)-initramfs.itb $@-fw/recovery.itb
+ $(CP) $@-boot.scr $@-fw/boot.scr
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $@-fw/rootfs.tgz -C $(TARGET_DIR) .
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $@-fw/boot.tgz -C $@.boot .
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $(KDIR_TMP)/$(IMAGE_PREFIX)-firmware.tgz -C $@-fw .
endef
define Device/Default
PROFILES := Default
- DEVICE_DTS := $(1)
+ DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
+ DEVICE_DTS_DIR := $(DTS_DIR)
BOARD_NAME = $$(DEVICE_DTS)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb | uImage none
-endef
-
-define Device/UBI
IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
+ UBINIZE_OPTS := -E 5
+ UBOOT :=
+ BOOT_SCRIPT :=
endef
-define Device/UBI-factory
- $(Device/UBI)
- IMAGES += factory.img
- IMAGE/factory.img := append-kernel $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+define Device/Default-arm64
+ BOOT_SCRIPT := generic-arm64
+ DEVICE_DTS_DIR := $(DTS_DIR)/marvell
+ IMAGES := sdcard.img.gz
+ IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+ KERNEL_NAME := Image
+ KERNEL := kernel-bin
endef
define Device/NAND-128K
- $(Device/UBI)
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
endef
define Device/NAND-256K
- $(Device/UBI)
BLOCKSIZE := 256k
PAGESIZE := 4096
endef
define Device/NAND-512K
- $(Device/UBI)
BLOCKSIZE := 512k
PAGESIZE := 4096
endef
-define Device/linksys
- DEVICE_TITLE := Linksys $(1)
- DEVICE_PACKAGES := kmod-mwlwifi wpad-mini swconfig
-endef
+ifeq ($(SUBTARGET),cortexa9)
+include cortexa9.mk
+endif
-define Device/armada-385-linksys
- $(Device/NAND-128K)
- $(Device/UBI-factory)
- KERNEL_SIZE := 6144k
-endef
+ifeq ($(SUBTARGET),cortexa53)
+include cortexa53.mk
+endif
-define Device/linksys-wrt1200ac
- $(call Device/linksys,WRT1200AC (Caiman))
- $(Device/armada-385-linksys)
- DEVICE_DTS := armada-385-linksys-caiman
-endef
-TARGET_DEVICES += linksys-wrt1200ac
-
-define Device/linksys-wrt1900acv2
- $(call Device/linksys,WRT1900ACv2 (Cobra))
- $(Device/armada-385-linksys)
- DEVICE_DTS := armada-385-linksys-cobra
-endef
-TARGET_DEVICES += linksys-wrt1900acv2
-
-define Device/linksys-wrt1900acs
- $(call Device/linksys,WRT1900ACS (Shelby))
- $(Device/armada-385-linksys)
- DEVICE_DTS := armada-385-linksys-shelby
-endef
-TARGET_DEVICES += linksys-wrt1900acs
-
-define Device/linksys-wrt1900ac
- $(call Device/linksys,WRT1900AC (Mamba))
- DEVICE_DTS := armada-xp-linksys-mamba
- $(Device/NAND-128K)
- $(Device/UBI-factory)
- KERNEL_SIZE := 3072k
-endef
-TARGET_DEVICES += linksys-wrt1900ac
-
-define Device/openblocks-ax3
- $(Device/UBI-factory)
- DEVICE_DTS := armada-xp-openblocks-ax3-4
- BLOCKSIZE := 128k
- PAGESIZE := 1
- IMAGE/factory.img := append-kernel $$$$(KERNEL_SIZE) | append-ubi
- DEVICE_TITLE := Plat'Home OpenBlocks AX3
-endef
-TARGET_DEVICES += openblocks-ax3
-
-define Device/armada-385-db-ap
- $(Device/NAND-256K)
- $(Device/UBI-factory)
- KERNEL_SIZE := 8192k
- DEVICE_TITLE := Marvell Armada 385 DB AP (DB-88F6820-AP)
-endef
-TARGET_DEVICES += armada-385-db-ap
-
-define Device/marvell-nand
- $(Device/NAND-512K)
- DEVICE_TITLE := Marvell Armada $(1)
-endef
-
-Device/armada-370-db = $(call Device/marvell-nand,370 DB (DB-88F6710-BP-DDR3))
-Device/armada-370-rd = $(call Device/marvell-nand,370 RD (RD-88F6710-A1))
-Device/armada-xp-db = $(call Device/marvell-nand,XP DB (DB-78460-BP))
-Device/armada-xp-gp = $(call Device/marvell-nand,XP GP (DB-MV784MP-GP))
-TARGET_DEVICES += armada-370-db armada-370-rd armada-xp-db armada-xp-gp
-
-define Device/armada-388-rd
- DEVICE_TITLE := Marvell Armada 388 RD (RD-88F6820-AP)
- IMAGES := firmware.bin
- IMAGE/firmware.bin := append-kernel 256k | append-rootfs | pad-rootfs
-endef
-TARGET_DEVICES += armada-388-rd
-
-define Device/armada-388-clearfog
- KERNEL_INSTALL := 1
- KERNEL := dtb | kernel-bin
- DEVICE_TITLE := SolidRun ClearFog
- DEVICE_PACKAGES := uboot-mvebu-clearfog kmod-fs-ext4
- IMAGES := bundle.tar.gz sdcard.img.gz
- IMAGE/bundle.tar.gz := clearfog-bundle
- IMAGE/sdcard.img.gz := boot-scr | boot-img | sdcard-img | gzip
- IMAGE_NAME = $$(IMAGE_PREFIX)-$$(2)
-endef
-TARGET_DEVICES += armada-388-clearfog
-
-define Device/globalscale-mirabox
- $(Device/NAND-512K)
- DEVICE_DTS := armada-370-mirabox
- DEVICE_TITLE := Globalscale Mirabox
-endef
-TARGET_DEVICES += globalscale-mirabox
+ifeq ($(SUBTARGET),cortexa72)
+include cortexa72.mk
+endif
$(eval $(call BuildImage))
projects / openwrt / staging / wigyori.git / blobdiff