ramips: remove default on userspace trigger for diag leds

[openwrt/staging/wigyori.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index b64e9d14c56c4392ecd4ee138e46f50321be3170..6da04ea9b155e8ee695ded0866009064e4706d1f 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -44,10 +44,6 @@ br-6475nd|\
 mzk-w300nh2)
        set_wifi_led "$boardname:amber:wlan"
        ;;
-a5-v11|\
-cs-qr10)
-       ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1"
-       ;;
 ai-br100)
        ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
        set_wifi_led "$boardname:blue:wlan"
@@ -78,7 +74,6 @@ awapn2403)
        ;;
 asl26555-8M|\
 asl26555-16M)
-       ucidef_set_led_default "power" "POWER" "asl26555:green:power" "1"
        ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
        set_wifi_led "asl26555:green:wlan"
        set_usb_led "asl26555:green:3g"
@@ -116,22 +111,16 @@ cy-swr1100)
        set_usb_led "$boardname:blue:usb"
        ;;
 d105)
-       ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1"
        set_usb_led "$boardname:green:usb"
        ;;
 d240)
        set_wifi_led "$boardname:blue:wifi"
        set_usb_led "$boardname:blue:usb"
        ;;
-db-wrt01)
-       ucidef_set_led_default "power" "power" "$boardname:orange:power" "1"
-       ;;
 dch-m225)
-       ucidef_set_led_default "power" "POWER" "$board:geeen:power" "1"
        ucidef_set_led_default "status" "STATUS" "$board:red:status" "0"
        ;;
 dcs-930l-b1)
-       ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1"
        ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
        ;;
 dir-300-b1|\
@@ -162,20 +151,18 @@ dlink,dwr-116-a1|\
 mzk-ex300np)
        set_wifi_led "$boardname:green:wifi"
        ;;
+dlink,dwr-118-a2)
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0e"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+       set_wifi_led "$boardname:green:wlan2g" "wlan1"
+       set_usb_led "$boardname:green:usb"
+       ucidef_set_led_default "internet" "internet" "$boardname:green:internet" "0"
+       ;;
 dlink,dwr-921-c1)
        set_wifi_led "$boardname:green:wifi"
        ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
        ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
        ;;
-dir-810l|\
-elecom,wrc-1167ghbk2-s|\
-iodata,wn-ax1167gr|\
-iodata,wn-gx300gr|\
-mzk-750dhp|\
-mzk-dp150n|\
-vr500)
-       ucidef_set_led_default "power" "power" "$boardname:green:power" "1"
-       ;;
 dir-860l-b1)
        ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
        ;;
@@ -218,18 +205,15 @@ gl-mt300n-v2)
        ;;
 hc5661|\
 hc5661a)
-       ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
        ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
        set_wifi_led "$boardname:blue:wlan2g"
        ;;
 hc5761)
-       ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
        ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
        set_wifi_led "$boardname:blue:wlan2g"
        ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0"
        ;;
 hc5861)
-       ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
        ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
        set_wifi_led "$boardname:blue:wlan2g"
        ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0"
@@ -240,6 +224,9 @@ hg255d)
        set_usb_led "$boardname:green:usb"
        ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
        ;;
+hiwifi,hc5861b)
+       set_wifi_led "$boardname:green:wlan2g"
+       ;;
 hpm)
        ucidef_set_led_default "power" "POWER" "$boardname:orange:power" "1"
        ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
@@ -288,13 +275,9 @@ mir3g)
        ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
        ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
        ;;
-miwifi-mini)
-       ucidef_set_led_default "power" "power" "$boardname:red:status" "1"
-       ;;
 mlw221|\
 mlwg2)
        set_wifi_led "$boardname:blue:wifi"
-       ucidef_set_led_default "system" "system" "$boardname:blue:system" "1"
        ;;
 mpr-a1|\
 mpr-a2)
@@ -305,13 +288,11 @@ mr-102n)
        set_usb_led "$boardname:green:usb"
        ;;
 mr200)
-       ucidef_set_led_default "power" "power" "$boardname:white:power" "1"
        ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
        ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
        set_wifi_led "$boardname:white:wlan"
        ;;
 mzk-ex750np)
-       ucidef_set_led_default "power" "power" "$boardname:red:power" "1"
        set_wifi_led "$boardname:red:wifi"
        ;;
 na930)
@@ -322,14 +303,10 @@ netgear,r6120)
        ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
        ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "phy1tpt"
        ;;
-newifi-d1)
-       set_usb_led "$boardname:red:status"
-       ;;
 nw718)
        set_usb_led "$boardname:amber:usb"
        ;;
 oy-0001)
-       ucidef_set_led_default "power" "power" "$boardname:green:power" "1"
        set_wifi_led "$boardname:green:wifi"
        ;;
 pbr-d1)
@@ -337,7 +314,6 @@ pbr-d1)
        ;;
 pbr-m1)
        ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
-       ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
        ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1"
        ;;
 d-team,newifi-d2)
@@ -349,11 +325,6 @@ d-team,newifi-d2)
 psg1208)
        set_wifi_led "$boardname:white:wlan2g"
        ;;
-psg1218a|\
-psg1218b)
-       ucidef_set_led_netdev "Network" "Network" "$boardname:blue:status" "eth0"
-       ucidef_set_led_default "status" "STATUS" "$boardname:yellow:status" "0"
-       ;;
 px-4885-4M|\
 px-4885-8M)
        set_wifi_led "px-4885:orange:wifi"
@@ -371,7 +342,6 @@ re350-v1)
        ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
        ;;
 re6500)
-       ucidef_set_led_default "power" "power" "$boardname:white:power" "1"
        ucidef_set_led_default "wifi" "wifi" "$boardname:orange:wifi" "1"
        ;;
 rp-n53)
@@ -383,13 +353,11 @@ rt-ac51u)
        set_usb_led "$boardname:blue:usb" "1-1"
        ;;
 rt-n12p)
-       ucidef_set_led_default "power" "power" "$board:green:power" "1"
-       ucidef_set_led_netdev "lan" "lan" "$board:green:lan" eth0.1
-       ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
-       set_wifi_led "$board:green:air"
+       ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
+       ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
+       set_wifi_led "$boardname:green:air"
        ;;
 rt-n14u)
-       ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
        ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
        ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
        set_wifi_led "$boardname:blue:air"
@@ -498,7 +466,6 @@ we1026-5g-16m)
 whr-1166d|\
 whr-300hp2|\
 whr-600d)
-       ucidef_set_led_default "power" "power" "$boardname:green:power" "1"
        ucidef_set_led_default "router" "router" "$boardname:green:router" "1"
        ;;
 wl-wn575a3)
@@ -544,7 +511,6 @@ zbt-cpe102)
        ucidef_set_led_default "power" "power" "$boardname:green:4g-0" "0"
        ;;
 zbt-wa05)
-       ucidef_set_led_default "power" "power" "$boardname:blue:power" "1"
        set_wifi_led "$boardname:blue:air"
        set_usb_led "$boardname:blue:usb"
        ;;
@@ -563,7 +529,6 @@ zbtlink,zbt-we1226)
        ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
        ;;
 zbt-wr8305rt)
-       ucidef_set_led_default "power" "power" "$boardname:green:sys" "1"
        set_usb_led "$boardname:green:usb"
        set_wifi_led "$boardname:green:wifi"
        ;;