ramips: add support for TP-Link Archer C20 v1

[openwrt/staging/wigyori.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 74ffeabca367fdd286297e8943c9fe015c18e500..a0baa61027105f94bad9da569623b84e08fed130 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -1,7 +1,6 @@
 #!/bin/sh
 
 . /lib/functions/uci-defaults.sh
-. /lib/ramips.sh
 
 set_usb_led() {
        ucidef_set_led_usbdev "usb" "USB" "${1}" "${2:-1-1}"
@@ -12,7 +11,7 @@ set_wifi_led() {
 }
 
 
-board=$(ramips_board_name)
+board=$(board_name)
 
 board_config_update
 
@@ -56,11 +55,12 @@ air3gii)
        set_wifi_led "$board:green:wlan"
        set_usb_led "$board:green:mobile"
        ;;
-all0256n)
+all0256n-4M|\
+all0256n-8M)
        ucidef_set_rssimon "wlan0" "200000" "1"
-       ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssilow" "wlan0" "1" "40" "0" "6"
-       ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssimed" "wlan0" "30" "80" "-29" "5"
-       ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8"
+       ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
+       ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
+       ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
        set_wifi_led "rt2800pci-phy0::radio"
        ;;
 ar670w|\
@@ -68,22 +68,30 @@ ar725w|\
 awapn2403)
        set_wifi_led "rt2800soc-phy0::radio"
        ;;
-asl26555)
-       ucidef_set_led_default "power" "POWER" "$board:green:power" "1"
-       ucidef_set_led_netdev "eth" "ETH" "$board:green:eth" "eth0"
-       set_wifi_led "$board:green:wlan"
-       set_usb_led "$board:green:3g"
+asl26555-8M|\
+asl26555-16M)
+       ucidef_set_led_default "power" "POWER" "asl26555:green:power" "1"
+       ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
+       set_wifi_led "asl26555:green:wlan"
+       set_usb_led "asl26555:green:3g"
        ;;
 bc2)
        set_usb_led "$board:blue:usb"
        ;;
-br-6425)
-       set_wifi_led "$board:orange:wlan"
-       ;;
 broadway)
        set_usb_led "$board:red:diskmounted"
        set_wifi_led "$board:red:wps_active"
        ;;
+c108)
+       ucidef_set_led_netdev "lan" "lan" "$board:green:lan" "eth0"
+       ucidef_set_led_netdev "modem" "modem" "$board:green:modem" "wwan0"
+       ;;
+c20)
+       ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
+       set_usb_led "$board:blue:usb"
+       ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:blue:wlan2g" "wlan0"
+       ;;
 c20i)
        ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
@@ -91,7 +99,6 @@ c20i)
        ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
        ;;
 c50)
-       ucidef_set_led_default "power" "power" "$board:green:power" "0"
        ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
        set_usb_led "$board:green:usb"
@@ -139,7 +146,8 @@ hlk-rm04|\
 sl-r7205|\
 v11st-fe|\
 w306r-v20|\
-wt1520)
+wt1520-4M|\
+wt1520-8M)
        set_wifi_led "rt2800pci-phy0::radio"
        ;;
 dir-615-d|\
@@ -162,7 +170,6 @@ dir-860l-b1)
        ;;
 ex2700|\
 wn3000rpv3)
-       ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
        set_wifi_led "$board:green:router"
        ;;
 ex3700)
@@ -181,11 +188,18 @@ fonera20n)
        set_usb_led "$board:orange:usb"
        set_wifi_led "$board:orange:wifi"
        ;;
+gb-pc1)
+       ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01"
+       ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10"
+       ;;
 gl-mt300a|\
 gl-mt300n|\
 gl-mt750)
        set_wifi_led "$board:wlan"
        ;;
+gl-mt300n-v2)
+       set_wifi_led "$board:red:wlan"
+       ;;
 hc5661|\
 hc5661a)
        ucidef_set_led_default "system" "system" "$board:blue:system" "1"
@@ -219,6 +233,11 @@ ht-tm02)
        ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
        set_wifi_led "$board:blue:wlan"
        ;;
+kn|\
+nbg-419n2)
+       set_usb_led "$board:green:usb"
+       set_wifi_led "rt2800pci-phy0::radio"
+       ;;
 kn_rc|\
 kn_rf|\
 kng_rc)
@@ -233,6 +252,10 @@ miniembplug)
        set_wifi_led "$board:red:wlan"
        set_usb_led "$board:green:mobile"
        ;;
+mir3g)
+       ucidef_set_led_netdev "eth" "Ethernet" "$board:red:wan" "eth0"
+       set_usb_led "$board:blue:usb"
+       ;;
 miwifi-mini)
        ucidef_set_led_default "power" "power" "$board:red:status" "1"
        ;;
@@ -262,10 +285,6 @@ mzk-ex750np)
 na930)
        set_usb_led "$board:blue:status"
        ;;
-nbg-419n2)
-       set_usb_led "$board:green:usb"
-       set_wifi_led "rt2800pci-phy0::radio"
-       ;;
 newifi-d1)
        set_usb_led "$board:red:status"
        ;;
@@ -287,19 +306,27 @@ pbr-m1)
 psg1208)
        set_wifi_led "$board:white:wlan2g"
        ;;
-psg1218)
+psg1218a|\
+psg1218b)
        ucidef_set_led_netdev "Network" "Network" "$board:blue:status" "eth0"
        ucidef_set_led_default "status" "STATUS" "$board:yellow:status" "0"
        ;;
-px-4885)
-       set_wifi_led "$board:orange:wifi"
-       set_usb_led "$board:blue:storage"
+px-4885-4M|\
+px-4885-8M)
+       set_wifi_led "px-4885:orange:wifi"
+       set_usb_led "px-4885:blue:storage"
        ;;
 r6220)
        ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
        set_wifi_led "$board:green:wifi"
        set_usb_led "$board:green:usb"
        ;;
+re350-v1)
+       ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$board:blue:wifi2G" "wlan0"
+       ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$board:blue:wifi5G" "wlan1"
+       ucidef_set_led_netdev "eth_act" "LAN act" "$board:green:eth_act" "eth0" "tx rx"
+       ucidef_set_led_switch "eth_link" "LAN link" "$board:green:eth_link" "switch0" "0x01"
+       ;;
 re6500)
        ucidef_set_led_default "power" "power" "$board:white:power" "1"
        ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
@@ -308,6 +335,10 @@ rp-n53)
        ucidef_set_led_netdev "eth" "Network" "$board:white:back" "eth0"
        set_wifi_led "$board:blue:wifi"
        ;;
+rt-ac51u)
+       set_wifi_led "$board:blue:wifi"
+       set_usb_led "$board:blue:usb" "1-1"
+       ;;
 rt-n14u)
        ucidef_set_led_default "power" "power" "$board:blue:power" "1"
        ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" eth0.1
@@ -323,13 +354,30 @@ tiny-ac)
        set_wifi_led "$board:orange:wifi"
        set_usb_led "$board:green:usb"
        ;;
-vocore)
-       ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0"
-       set_wifi_led "$board:green:status"
+tl-wr840n-v4)
+       set_wifi_led "$board:green:wlan"
+       ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
+       ;;
+tl-wr841n-v13)
+       set_wifi_led "$board:green:wlan"
+       ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x2"
+       ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x4"
+       ucidef_set_led_switch "lan3" "lan3" "$board:green:lan3" "switch0" "0x8"
+       ucidef_set_led_switch "lan4" "lan4" "$board:green:lan4" "switch0" "0x10"
+       ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
+       ;;
+vocore-8M|\
+vocore-16M)
+       ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
+       set_wifi_led "vocore:green:status"
        ;;
 vocore2)
        set_wifi_led "$board:fuchsia:status"
        ;;
+vocore2lite)
+       set_wifi_led "$board:green:status"
+       ;;
 w502u)
        set_usb_led "$board:blue:usb"
        set_wifi_led "rt2800pci-phy0::radio"
@@ -337,6 +385,11 @@ w502u)
 wcr-150gn)
        set_usb_led "$board:amber:user"
        ;;
+we1026-5g-16m)
+       ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
+       set_wifi_led "we1026-5g:green:wifi"
+       set_usb_led "we1026-5g:green:usb" "1-1.1"
+       ;;
 whr-1166d|\
 whr-300hp2|\
 whr-600d)
@@ -345,9 +398,9 @@ whr-600d)
        ;;
 wl-wn575a3)
        ucidef_set_rssimon "wlan1" "200000" "1"
-       ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49" "0" "1"
-       ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84" "0" "1"
-       ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100" "0" "1"
+       ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49"
+       ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84"
+       ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100"
        ;;
 wrh-300cr)
        set_wifi_led "$board:green:wlan"
@@ -356,8 +409,9 @@ wrh-300cr)
 wndr3700v5)
        ucidef_set_led_default "power" "POWER" "$board:green:power" "0"
        ;;
-wt3020)
-       ucidef_set_led_default "power" "power" "$board:blue:power" "0"
+wt3020-4M|\
+wt3020-8M)
+       ucidef_set_led_default "power" "power" "wt3020:blue:power" "0"
        ;;
 y1)
        set_usb_led "$board:blue:usb"
@@ -385,10 +439,13 @@ zbt-wa05)
        set_wifi_led "$board:blue:air"
        set_usb_led "$board:blue:usb"
        ;;
-zbt-we826)
-       ucidef_set_led_default "power" "power" "$board:green:power" "1"
-       set_wifi_led "$board:green:wifi"
-       set_usb_led "$board:green:usb"
+zbt-we2026)
+       set_wifi_led "$board:green:wlan"
+       ;;
+zbt-we826-16M|\
+zbt-we826-32M)
+       set_wifi_led "zbt-we826:green:wifi"
+       set_usb_led "zbt-we826:green:usb"
        ;;
 zbt-wr8305rt)
        ucidef_set_led_default "power" "power" "$board:green:sys" "1"