ramips: rework network settings for HC5861

[openwrt/staging/wigyori.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index eed8d503923ea7894d5cec420df26945c6b61d3c..6657b7273d17bb00f2c56835d3bbc65613786ef7 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -33,6 +33,7 @@ ramips_setup_interfaces()
        case $board in
        11acnas|\
        d-team,newifi-d2|\
+       dir-615-h1|\
        w2914nsv2|\
        zbt-we2026)
                ucidef_add_switch "switch0" \
@@ -80,6 +81,7 @@ ramips_setup_interfaces()
        ai-br100|\
        alfa-network,ac1200rm|\
        mediatek,ap-mt7621a-v60|\
+       xzwifi,creativebox-v1|\
        d240|\
        db-wrt01|\
        dir-300-b7|\
@@ -89,6 +91,7 @@ ramips_setup_interfaces()
        dir-810l|\
        dlink,dwr-116-a1|\
        dlink,dwr-921-c1|\
+       dlink,dwr-922-e2|\
        ew1200|\
        firewrt|\
        hc5661a|\
@@ -105,7 +108,6 @@ ramips_setup_interfaces()
        mtc,wr1201|\
        mzk-750dhp|\
        mzk-w300nh2|\
-       netgear,r6120|\
        nixcore-x1-8M|\
        nixcore-x1-16M|\
        oy-0001|\
@@ -113,6 +115,7 @@ ramips_setup_interfaces()
        psg1208|\
        psg1218a|\
        r6220|\
+       netgear,r6350|\
        rt-n12p|\
        sap-g3200u3|\
        sk-wb8|\
@@ -120,11 +123,11 @@ ramips_setup_interfaces()
        unielec,u7621-06-512m-64m|\
        vr500|\
        wavlink,wl-wn570ha1|\
+       wavlink,wl-wn575a3|\
        wf-2881|\
        whr-g300n|\
        mqmaker,witi-256m|\
        mqmaker,witi-512m|\
-       wl-wn575a3|\
        wndr3700v5|\
        youku-yk1|\
        zbt-ape522ii|\
@@ -139,6 +142,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       gehua,ghl-r-001)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
+               ;;
        alfa-network,awusfree1|\
        cs-qr10|\
        d105|\
@@ -154,6 +161,7 @@ ramips_setup_interfaces()
        ravpower,wd03|\
        tama,w06|\
        tplink,tl-mr3020-v3|\
+       tplink,tl-wr802n-v4|\
        u25awf-h1|\
        wli-tx4-ag300n|\
        wmdr-143n|\
@@ -191,6 +199,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
                ;;
+       belkin,f9k1109v1|\
        rt-n15|\
        wl-351)
                ucidef_add_switch "switch0" \
@@ -215,13 +224,14 @@ ramips_setup_interfaces()
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
+       mikrotik,rb750gr3|\
        mikrotik,rbm33g|\
        mzk-wdpr|\
-       rb750gr3|\
        rt-n14u|\
        skylab,skw92a|\
        tplink,c20-v4|\
        tplink,c50-v3|\
+       tplink,c50-v4|\
        tplink,tl-mr3420-v5|\
        tplink,tl-wr842n-v5|\
        tl-wr840n-v4|\
@@ -305,11 +315,18 @@ ramips_setup_interfaces()
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
        hc5661|\
-       hc5861|\
        y1s)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
                ;;
+       hc5861)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "5:wan" "6@eth0"
+               ;;
+       iodata,wn-ac1167gr)
+               ucidef_add_switch "switch1" \
+                       "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+               ;;
        kn_rf)
                ucidef_add_switch "switch0" \
                        "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
@@ -328,6 +345,10 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
                ucidef_set_interface_wan "usb0"
                ;;
+       netgear,r6120)
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+               ;;
        hc5761)
                ucidef_add_switch "switch0" \
                        "1:lan" "4:lan" "0:wan" "6@eth0"
@@ -466,6 +487,10 @@ ramips_setup_macs()
                lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       belkin,f9k1109v1)
+               wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
+               lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
+               ;;
        br-6475nd)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(mtd_get_mac_binary devdata 7)
@@ -486,6 +511,7 @@ ramips_setup_macs()
        dlink,dwr-118-a1|\
        dlink,dwr-118-a2|\
        dlink,dwr-921-c1|\
+       dlink,dwr-922-e2|\
        lava,lr-25g001)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -515,6 +541,9 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       iodata,wn-ac1167gr)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" -1)
+               ;;
        iodata,wn-ax1167gr|\
        iodata,wn-gx300gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
@@ -561,7 +590,8 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
-       r6220)
+       r6220|\
+       netgear,r6350)
                wan_mac=$(mtd_get_mac_binary factory 4)
                lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;