ramips: add support for Zorlik ZL5900V2

[openwrt/staging/wigyori.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 947b0dd8aea6a49d164196f6451547ef7f6b2970..b7e5fb6ff935e725ba0192d42e57aeaf0de00273 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -57,9 +57,11 @@ ramips_setup_interfaces()
        omega2p | \
        timecloud|\
        w150m|\
-       widora-neo|\
+       widora,neo-16m|\
+       widora,neo-32m|\
        wnce2001|\
        zbt-cpe102|\
+       zorlik,zl5900v2|\
        zte-q7)
                ucidef_add_switch "switch0"
                ucidef_add_switch_attr "switch0" "enable" "false"
@@ -71,12 +73,16 @@ ramips_setup_interfaces()
                ;;
        3g-6200n|\
        ai-br100|\
+       alfa-network,ac1200rm|\
+       mediatek,ap-mt7621a-v60|\
        d240|\
        db-wrt01|\
        dir-300-b7|\
        dir-320-b1|\
        dir-610-a1|\
        dir-615-h1|\
+       dlink,dwr-116-a1|\
+       dlink,dwr-921-c1|\
        ew1200|\
        firewrt|\
        hc5661a|\
@@ -92,6 +98,7 @@ ramips_setup_interfaces()
        mt7628|\
        mzk-750dhp|\
        mzk-w300nh2|\
+       d-team,newifi-d2|\
        nixcore-x1-8M|\
        nixcore-x1-16M|\
        oy-0001|\
@@ -105,12 +112,10 @@ ramips_setup_interfaces()
        u7621-06-256M-16M|\
        vr500|\
        wf-2881|\
+       whr-g300n|\
        witi|\
        wl-wn575a3|\
        wndr3700v5|\
-       wt1520-4M|\
-       wt1520-8M|\
-       y1|\
        youku-yk1|\
        zbt-ape522ii|\
        zbt-we1326|\
@@ -124,6 +129,27 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       alfa-network,awusfree1|\
+       cs-qr10|\
+       d105|\
+       dlink,dap-1522-a1|\
+       dch-m225|\
+       ex2700|\
+       ex3700|\
+       hpm|\
+       mzk-ex300np|\
+       mzk-ex750np|\
+       na930|\
+       pbr-d1|\
+       tama,w06|\
+       u25awf-h1|\
+       wli-tx4-ag300n|\
+       wmdr-143n|\
+       wmr-300|\
+       wn3000rpv3|\
+       wrh-300cr)
+               ucidef_set_interface_lan "eth0"
+               ;;
        mir3g)
                ucidef_add_switch "switch0" \
                        "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
@@ -172,6 +198,9 @@ ramips_setup_interfaces()
        mzk-wdpr|\
        rb750gr3|\
        rt-n14u|\
+       tplink,c20-v4|\
+       tplink,c50-v3|\
+       tplink,tl-mr3420-v5|\
        tl-wr840n-v4|\
        tl-wr840n-v5|\
        tl-wr841n-v13|\
@@ -182,14 +211,13 @@ ramips_setup_interfaces()
        wrtnode|\
        wrtnode2p | \
        wrtnode2r | \
-       wt3020-4M|\
-       wt3020-8M|\
+       youhua,wr1200js|\
        zbt-wa05)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
-       c20|\
-       c50)
+       c50|\
+       tplink,c20-v1)
                ucidef_add_switch "switch0" \
                        "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
                ;;
@@ -197,7 +225,8 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
-       gb-pc1)
+       gb-pc1|\
+       gnubee,gb-pc2)
                ucidef_add_switch "switch0" \
                        "0:lan" "4:lan" "6@eth0"
                ;;
@@ -231,24 +260,6 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
                ;;
-       cs-qr10|\
-       d105|\
-       dch-m225|\
-       ex2700|\
-       ex3700|\
-       hpm|\
-       mzk-ex300np|\
-       mzk-ex750np|\
-       na930|\
-       pbr-d1|\
-       u25awf-h1|\
-       wli-tx4-ag300n|\
-       wmdr-143n|\
-       wmr-300|\
-       wn3000rpv3|\
-       wrh-300cr)
-               ucidef_set_interface_lan "eth0"
-               ;;
        duzun-dm06)
                ucidef_add_switch "switch0" \
                        "1:lan" "0:wan" "6@eth0"
@@ -313,7 +324,13 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
-       vonets,var11n-300)
+       tplink,tl-wr902ac-v3)
+               ucidef_add_switch "switch0" \
+                       "4:lan" "6@eth0"
+               ;;
+       vonets,var11n-300|\
+       wt1520-4M|\
+       wt1520-8M)
                ucidef_add_switch "switch0" \
                        "0:lan" "4:wan" "6@eth0"
                ;;
@@ -346,6 +363,16 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "0:wan" "6@eth0"
                ;;
+       wt3020-4M|\
+       wt3020-8M)
+               ucidef_add_switch "switch0" \
+                       "4:lan" "0:wan" "6@eth0"
+               ;;
+       zbtlink,zbt-we1226|\
+       y1)
+               ucidef_add_switch "switch0" \
+                       "0:lan:2" "1:lan:1" "4:wan" "6@eth0"
+               ;;
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
@@ -410,10 +437,16 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
                wan_mac=$(mtd_get_mac_ascii factory wanmac)
                ;;
+       dlink,dwr-116-a1|\
+       dlink,dwr-921-c1)
+               wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
+               ;;
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
-       gl-mt300n-v2)
+       gl-mt300n-v2|\
+       whr-g300n)
                wan_mac=$(mtd_get_mac_binary factory 4)
                ;;
        hc5*61|\