ramips: update device tree source files

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / 3G-6200NL.dts

diff --git a/target/linux/ramips/dts/3G-6200NL.dts b/target/linux/ramips/dts/3G-6200NL.dts
index c7634f6eaf2dbf63a5106af70b56c8dcd4787206..c95c5bf2da8bd3185293ef8561ad5cf526569a16 100644 (file)
--- a/target/linux/ramips/dts/3G-6200NL.dts
+++ b/target/linux/ramips/dts/3G-6200NL.dts
@@ -1,56 +1,63 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
-/ {
-       compatible = "3G-6200N", "ralink,rt3050-soc";
-       model = "Edimax 3g-6200n";
-
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
-       };
+/ {
+       compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
+       model = "Edimax 3g-6200nl";
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
-       };
 
-       ethernet@10100000 {
-               status = "okay";
-       };
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@3e0000 {
+                       label = "cimage";
+                       reg = <0x3e0000 0x20000>;
+                       read-only;
+               };
 
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x390000>;
+               };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
+               internet {
+                       label = "3g-6200nl:green:internet";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
+
                wlan {
-                       label = "edimax:amber:wlan";
-                       gpios = <&gpio0 14 1>;
+                       label = "3g-6200nl:green:wlan";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -59,18 +66,36 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 12 1>;
-                       linux,code = <0x211>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       wmac@10180000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
+};
 
-       otg@101c0000 {
-               status = "okay";
-       };
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portdisable = <0x37>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
 };