ramips: add support for D-Link DAP-1522 A1

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / AR670W.dts

diff --git a/target/linux/ramips/dts/AR670W.dts b/target/linux/ramips/dts/AR670W.dts
index 07497cb616fe3462434a093bf7adf673c5cfc414..3759f4a8c4e4855cc6090aefabc1115140fcf795 100644 (file)
--- a/target/linux/ramips/dts/AR670W.dts
+++ b/target/linux/ramips/dts/AR670W.dts
@@ -1,53 +1,17 @@
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "AR670W", "ralink,rt2880-soc";
+       compatible = "airlink101,ar670w", "ralink,rt2880-soc";
        model = "Airlink101 AR670W";
 
-       palmbus@300000 {
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "spi", "uartlite";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@400000 {
-               status = "okay";
-               mtd-mac-address = <&factory 0x2004>;
-
-               port@0 {
-                       phy-handle = <&phy0>;
-                       phy-mode = "mii";
-               };
-
-               mdio-bus {
-                       status = "okay";
-                       phy0: ethernet-phy@0 {
-                               phy-mode = "mii";
-                               reg = <0>;
-                       };
-               };
-       };
-
-       wmac@480000 {
-               status = "okay";
-               ralink,mtd-eeprom = <&factory 0x2000>;
-       };
-
        cfi@bdc00000 {
                compatible = "cfi-flash";
                reg = <0xbc400000 0x800000>;
-
                bank-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
@@ -75,12 +39,12 @@
 
                status {
                        label = "ar670w:green:power";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
 
                wpsblue {
                        label = "ar670w:blue:wps";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -89,15 +53,54 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 9 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "spi", "uartlite";
+                       ralink,function = "gpio";
                };
        };
 };
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x2004>;
+
+       port@0 {
+               phy-handle = <&phy0>;
+               phy-mode = "mii";
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       phy-mode = "mii";
+                       reg = <0>;
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+       ralink,mtd-eeprom = <&factory 0x2000>;
+};