ramips: fix size-cells on spi nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ASL26555-16M.dts

diff --git a/target/linux/ramips/dts/ASL26555-16M.dts b/target/linux/ramips/dts/ASL26555-16M.dts
index 8bc98df160612599dc28b7dc064a41ced1beb96a..56f3c9d99c9fb854ece6b76f57338ca3886d2fe6 100644 (file)
--- a/target/linux/ramips/dts/ASL26555-16M.dts
+++ b/target/linux/ramips/dts/ASL26555-16M.dts
@@ -1,91 +1,23 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "ASL26555", "ralink,rt3050-soc";
        model = "Alpha ASL26555";
 
-       palmbus@10000000 {
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
-               spi@b00 {
-                       status = "okay";
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "s25sl12801";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "s25sl12801";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "uboot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-                               partition@30000 {
-                                       label = "uboot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-                               partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xf80000>;
-                               };
-                               partition@fd0000 {
-                                       label = "cert";
-                                       reg = <0xfd0000 0x10000>;
-                                       read-only;
-                               };
-                               partition@fe0000 {
-                                       label = "langpack";
-                                       reg = <0xfe0000 0x10000>;
-                                       read-only;
-                               };
-                               partition@ff0000 {
-                                       label = "devdata";
-                                       reg = <0xff0000 0x10000>;
-                                       read-only;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       esw@10110000 {
-               ralink,portmap = <0x1e>;
-       };
-
-       otg@101c0000 {
-               status = "okay";
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 0>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 12 0>;
@@ -95,37 +27,128 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                eth {
                        label = "asl26555:green:eth";
                        gpios = <&gpio0 0 1>;
                };
+
                wan-red {
                        label = "asl26555:red:wan";
                        gpios = <&gpio0 1 0>;
                };
+
                wan-green {
                        label = "asl26555:green:wan";
                        gpios = <&gpio0 2 0>;
                };
+
                wlan {
                        label = "asl26555:green:wlan";
                        gpios = <&gpio0 7 0>;
                };
+
                power-green {
                        label = "asl26555:green:power";
                        gpios = <&gpio0 8 0>;
                };
+
                power-red {
                        label = "asl26555:red:power";
                        gpios = <&gpio0 9 0>;
                };
+
                3g-green {
                        label = "asl26555:green:3g";
                        gpios = <&gpio0 14 1>;
                };
+
                3g-red {
                        label = "asl26555:red:3g";
                        gpios = <&gpio0 17 1>;
                };
        };
 };
+
+&gpio0 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80", "s25sl12801";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "uboot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "uboot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xf80000>;
+               };
+
+               partition@fd0000 {
+                       label = "cert";
+                       reg = <0xfd0000 0x10000>;
+                       read-only;
+               };
+
+               partition@fe0000 {
+                       label = "langpack";
+                       reg = <0xfe0000 0x10000>;
+                       read-only;
+               };
+
+               devdata: partition@ff0000 {
+                       label = "devdata";
+                       reg = <0xff0000 0x10000>;
+                       read-only;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+       mediatek,portmap = <0x1e>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&devdata 0x4000>;
+};
+
+&otg {
+       status = "okay";
+};