ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ATP-52B.dts

diff --git a/target/linux/ramips/dts/ATP-52B.dts b/target/linux/ramips/dts/ATP-52B.dts
index f7e9ac77d9c7789e28999398b53aa4baec19b8e2..2fa5c19d04f388b9ff8c6e8532d783d1c7697677 100644 (file)
--- a/target/linux/ramips/dts/ATP-52B.dts
+++ b/target/linux/ramips/dts/ATP-52B.dts
@@ -1,18 +1,19 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "ATP-52B", "ralink,rt3052-soc";
+       compatible = "argus,atp-52b", "ralink,rt3052-soc";
        model = "Argus ATP-52B";
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
+       aliases {
+               led-boot = &led_run;
+               led-failsafe = &led_run;
+               led-running = &led_run;
+               led-upgrade = &led_run;
        };
 
        cfi@1f000000 {
@@ -20,77 +21,90 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       label = "bootloader";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               partition@30000 {
-                       label = "config";
-                       reg = <0x30000 0x10000>;
-               };
+                       partition@0 {
+                               label = "bootloader";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
 
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-               };
+                       partition@30000 {
+                               label = "config";
+                               reg = <0x30000 0x10000>;
+                       };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7a0000>;
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7a0000>;
+                       };
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
-               run {
+               led_run: run {
                        label = "atp-52b:green:run";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                net {
                        label = "atp-52b:amber:net";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
+};
 
-       esw@10110000 {
-               mediatek,portmap = <0x3e>;
-       };
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
 
-       otg@101c0000 {
-               status = "okay";
-       };
+&esw {
+       mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
 };