ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ArcherC20i.dts
index 5d0fc308c3cd14fb5d72906d8268e30df1f55e39..cf715a413f97c9ad46f1772b99463083a179f4fa 100644 (file)
@@ -2,52 +2,54 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-       compatible = "ralink,mt7620a-soc";
+       compatible = "tplink,c20i", "ralink,mt7620a-soc";
        model = "TP-Link Archer C20i";
 
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
                lan {
                        label = "c20i:blue:lan";
-                       gpios = <&gpio0 1 1>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                };
                usb {
                        label = "c20i:blue:usb";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
                wps {
                        label = "c20i:blue:wps";
-                       gpios = <&gpio1 15 1>;
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
                wan {
                        label = "c20i:blue:wan";
-                       gpios = <&gpio2 0 1>;
+                       gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
                };
                wlan {
                        label = "c20i:blue:wlan";
-                       gpios = <&gpio3 0 1>;
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
 
-       gpio-keys {
+       keys {
                compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
+
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio0 2 1>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RFKILL>;
                };
                reset_wps {
                        label = "reset_wps";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x20000>;
-                       read-only;
-               };
-
-               partition@20000 {
-                       label = "firmware";
-                       reg = <0x20000 0x7a0000>;
-               };
-
-               partition@7c0000 {
-                       label = "config";
-                       reg = <0x7c0000 0x10000>;
-               };
-
-               rom: partition@7d0000 {
-                       label = "rom";
-                       reg = <0x7d0000 0x10000>;
-               };
-
-               partition@7e0000 {
-                       label = "romfile";
-                       reg = <0x7e0000 0x10000>;
-               };
-
-               radio: partition@7f0000 {
-                       label = "radio";
-                       reg = <0x7f0000 0x10000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               compatible = "tplink,firmware";
+                               label = "firmware";
+                               reg = <0x20000 0x7a0000>;
+                       };
+
+                       partition@7c0000 {
+                               label = "config";
+                               reg = <0x7c0000 0x10000>;
+                       };
+
+                       rom: partition@7d0000 {
+                               label = "rom";
+                               reg = <0x7d0000 0x10000>;
+                       };
+
+                       partition@7e0000 {
+                               label = "romfile";
+                               reg = <0x7e0000 0x10000>;
+                       };
+
+                       radio: partition@7f0000 {
+                               label = "radio";
+                               reg = <0x7f0000 0x10000>;
+                       };
                };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&radio 32768>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&radio 32768>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
 };