ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / BR-6475ND.dts
index 8c8a980..f7fb8b5 100644 (file)
 /dts-v1/;
 
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "BR-6475ND", "ralink,rt3883-soc";
+       compatible = "edimax,br-6475nd", "ralink,rt3883-soc";
        model = "Edimax BR-6475nD";
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "spi", "jtag", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
-       palmbus@10000000 {
-               timer@100 {
-                       status = "okay";
-               };
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
 
-               gpio1: gpio@638 {
-                       status = "okay";
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
-               uartlite@c00 {
-                       status = "okay";
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <EV_SW>;
+                       linux,code = <KEY_RFKILL>;
                };
        };
 
-       ethernet@10100000 {
-               status = "okay";
-               mtd-mac-address = <&devdata 0x0d>;
+       leds {
+               compatible = "gpio-leds";
 
-               port@0 {
-                       ralink,fixed-link = <1000 1 1 1>;
+               led_power: power {
+                       label = "br-6475nd:green:power";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
-       };
-
-       wmac@10180000 {
-               status = "okay";
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       pci@10140000 {
-               status = "okay";
-               pinctrl-names = "default";
-               pinctrl-0 = <&pci_pins>;
 
-               pci_pins: pci {
-                       pci {
-                               ralink,group = "pci";
-                               ralink,function = "pci-fnc";
-                       };
+               wlan {
+                       label = "br-6475nd:amber:wlan";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
-               host-bridge {
-                       pci-bridge@1 {
-                               status = "okay";
-
-                               wmac@0,0 {
-                                       ralink,5ghz = <0>;
-                                       compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
-                                       reg = < 0x10000 0 0 0 0 >;
-                                       ralink,eeprom = "rt2x00pci_1_0.eeprom";
-                               };
-                       };
+               wlan_5ghz {
+                       label = "br-6475nd:amber:wlan_5ghz";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
        };
 
-       ehci@101c0000 {
-               status = "okay";
-       };
-
-       ohci@101c1000 {
-               status = "okay";
-       };
-
        nor-flash@1c000000 {
                compatible = "cfi-flash";
                reg = <0x1c000000 0x800000>;
                bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       reg = <0x00000000 0x00030000>;
-                       label = "u-boot";
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               partition@30000 {
-                       reg = <0x00030000 0x00010000>;
-                       label = "nvram";
-                       read-only;
-               };
+                       partition@0 {
+                               reg = <0x00000000 0x00030000>;
+                               label = "u-boot";
+                               read-only;
+                       };
 
-               factory: partition@40000 {
-                       reg = <0x00040000 0x00010000>;
-                       label = "factory";
-                       read-only;
-               };
+                       partition@30000 {
+                               reg = <0x00030000 0x00010000>;
+                               label = "nvram";
+                               read-only;
+                       };
 
-               devdata: partition@50000 {
-                       reg = <0x00050000 0x00020000>;
-                       label = "devdata";
-                       read-only;
-               };
+                       factory: partition@40000 {
+                               reg = <0x00040000 0x00010000>;
+                               label = "factory";
+                               read-only;
+                       };
 
-               partition@70000 {
-                       reg = <0x00070000 0x00790000>;
-                       label = "firmware";
-               };
+                       devdata: partition@50000 {
+                               reg = <0x00050000 0x00020000>;
+                               label = "devdata";
+                               read-only;
+                       };
 
-               partition@170000 {
-                       reg = <0x00270000 0x00590000>;
-                       label = "rootfs";
+                       partition@70000 {
+                               compatible = "edimax,uimage";
+                               reg = <0x00070000 0x00790000>;
+                               label = "firmware";
+                       };
                };
        };
 
        rtl8367 {
                compatible = "realtek,rtl8367";
-               gpio-sda = <&gpio0 5 0>;
-               gpio-sck = <&gpio0 4 0>;
+               gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
                realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
        };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
+       /*
+        * Unclear if this is the correct gpio setup; the USB ports are
+        * unpopulated on a stock BR-6475nD, even though the hardware exists
+        * and the headers are there.
+        */
+       /*
+       gpio_export {
+               compatible = "gpio-export";
                #size-cells = <0>;
-               poll-interval = <100>;
 
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 7 1>;
-                       linux,code = <0x198>;
+               usb {
+                       gpio-export,name="usb";
+                       gpio-export,output=<0>;
+                       gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
                };
+       };
+       */
+};
 
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio0 9 1>;
-                       linux,input-type = <5>;
-                       linux,code = <0xf7>;
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "jtag", "uartf";
+                       ralink,function = "gpio";
                };
        };
+};
 
-       gpio-leds {
-               compatible = "gpio-leds";
+&timer {
+       status = "okay";
+};
 
-               power {
-                       label = "br-6475nd:green:power";
-                       gpios = <&gpio0 10 1>;
-               };
+&gpio1 {
+       status = "okay";
+};
 
-               wlan {
-                       label = "br-6475nd:amber:wlan";
-                       gpios = <&gpio0 11 1>;
-               };
+&uartlite {
+       status = "okay";
+};
 
-               wlan_5ghz {
-                       label = "br-6475nd:amber:wlan_5ghz";
-                       gpios = <&gpio0 14 1>;
-               };
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&devdata 0x0d>;
+
+       port@0 {
+               mediatek,fixed-link = <1000 1 1 1>;
        };
+};
 
-       /* Unclear if this is the correct gpio setup; the USB ports are
-          unpopulated on a stock BR-6475nD, even though the hardware exists
-          and the headers are there. */
-       /*
-       gpio_export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
+&wmac {
+       status = "okay";
+       ralink,mtd-eeprom = <&factory 0>;
+};
 
-               usb {
-                       gpio-export,name="usb";
-                       gpio-export,output=<0>;
-                       gpios = <&gpio0 19 0>;
-               };
+&pci {
+       status = "okay";
+};
+
+&pci1 {
+       status = "okay";
+
+       wifi@0,0 {
+               compatible = "pci0,0";
+               reg = <0x10000 0 0 0 0>;
+               ralink,5ghz = <0>;
+               ralink,mtd-eeprom = <&factory 0x8000>;
        };
-       */
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
 };