ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / BR-6475ND.dts

diff --git a/target/linux/ramips/dts/BR-6475ND.dts b/target/linux/ramips/dts/BR-6475ND.dts
index c9e8d2894a595359e1322c4932ce75ddb11d2d55..f7fb8b5c40e90ca6cced5a96a6ff6124ce8a4e92 100644 (file)
--- a/target/linux/ramips/dts/BR-6475ND.dts
+++ b/target/linux/ramips/dts/BR-6475ND.dts
@@ -10,10 +10,13 @@
        model = "Edimax BR-6475nD";
 
        aliases {
-               led-status = &led_power;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
                poll-interval = <100>;
 
@@ -31,7 +34,7 @@
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
                led_power: power {
@@ -54,36 +57,41 @@
                compatible = "cfi-flash";
                reg = <0x1c000000 0x800000>;
                bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       reg = <0x00000000 0x00030000>;
-                       label = "u-boot";
-                       read-only;
-               };
-
-               partition@30000 {
-                       reg = <0x00030000 0x00010000>;
-                       label = "nvram";
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       reg = <0x00040000 0x00010000>;
-                       label = "factory";
-                       read-only;
-               };
-
-               devdata: partition@50000 {
-                       reg = <0x00050000 0x00020000>;
-                       label = "devdata";
-                       read-only;
-               };
-
-               partition@70000 {
-                       reg = <0x00070000 0x00790000>;
-                       label = "firmware";
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x00000000 0x00030000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               reg = <0x00030000 0x00010000>;
+                               label = "nvram";
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               reg = <0x00040000 0x00010000>;
+                               label = "factory";
+                               read-only;
+                       };
+
+                       devdata: partition@50000 {
+                               reg = <0x00050000 0x00020000>;
+                               label = "devdata";
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               compatible = "edimax,uimage";
+                               reg = <0x00070000 0x00790000>;
+                               label = "firmware";
+                       };
                };
        };
 
@@ -94,9 +102,11 @@
                realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
        };
 
-       /* Unclear if this is the correct gpio setup; the USB ports are
-          unpopulated on a stock BR-6475nD, even though the hardware exists
-          and the headers are there. */
+       /*
+        * Unclear if this is the correct gpio setup; the USB ports are
+        * unpopulated on a stock BR-6475nD, even though the hardware exists
+        * and the headers are there.
+        */
        /*
        gpio_export {
                compatible = "gpio-export";