ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / CF-WR800N.dts

diff --git a/target/linux/ramips/dts/CF-WR800N.dts b/target/linux/ramips/dts/CF-WR800N.dts
index beb28052375f2f4c4878567a455cb7c19f280750..65f44e43d7ab08154136e6a89077752fb11aa534 100644 (file)
--- a/target/linux/ramips/dts/CF-WR800N.dts
+++ b/target/linux/ramips/dts/CF-WR800N.dts
@@ -1,115 +1,125 @@
 /dts-v1/;
 
-/include/ "mt7620n.dtsi"
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "cf-wr800n", "ralink,mt7620n-soc";
+       compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
        model = "Comfast CF-WR800N";
 
+       aliases {
+               led-boot = &led_wps;
+               led-failsafe = &led_wps;
+               led-running = &led_wps;
+               led-upgrade = &led_wps;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
+       leds {
+               compatible = "gpio-leds";
 
-               gpio1: gpio@638 {
-                       status = "okay";
+               ethernet {
+                       label = "cf-wr800n:white:ethernet";
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
-               gpio2: gpio@660 {
-                       status = "okay";
+               wifi {
+                       label = "cf-wr800n:white:wifi";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
-               gpio3: gpio@688 {
-                       status = "okay";
+               led_wps: wps {
+                       label = "cf-wr800n:white:wps";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
+       };
 
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "mx25l6405d";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "w25q64";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
+&gpio0 {
+       status = "okay";
+};
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+&gpio1 {
+       status = "okay";
+};
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       default {
-                               ralink,group = "ephy", "wled", "spi refclk", "i2c";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
+&gpio2 {
+       status = "okay";
+};
 
-       gpio-leds {
-               compatible = "gpio-leds";
+&gpio3 {
+       status = "okay";
+};
 
-               ethernet {
-                       label = "comfast:white:ethernet";
-                       gpios = <&gpio2 4 1>;
-               };
+&spi0 {
+       status = "okay";
 
-               wifi {
-                       label = "comfast:white:wifi";
-                       gpios = <&gpio3 0 1>;
-               };
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
 
-               wps {
-                       label = "comfast:white:wps";
-                       gpios = <&gpio1 15 1>;
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
        };
+};
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
 
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0x198>;
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               default {
+                       ralink,group = "ephy", "wled", "spi refclk", "i2c";
+                       ralink,function = "gpio";
                };
        };
 };