ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DAP-1350.dts

diff --git a/target/linux/ramips/dts/DAP-1350.dts b/target/linux/ramips/dts/DAP-1350.dts
index 107acdb2c3bdd008e420fd5d73103a6ce3bd02a6..06d490cacc8030b2daa4ed060591b37ef604d45b 100644 (file)
--- a/target/linux/ramips/dts/DAP-1350.dts
+++ b/target/linux/ramips/dts/DAP-1350.dts
@@ -9,6 +9,13 @@
        compatible = "dlink,dap-1350", "ralink,rt3052-soc";
        model = "D-Link DAP-1350";
 
        compatible = "dlink,dap-1350", "ralink,rt3052-soc";
        model = "D-Link DAP-1350";
 

+       aliases {
+               led-boot = &led_power_blue;
+               led-failsafe = &led_power_blue;
+               led-running = &led_power_blue;
+               led-upgrade = &led_power_blue;
+       };
+

        chosen {
                bootargs = "console=ttyS0,115200";
        };
        chosen {
                bootargs = "console=ttyS0,115200";
        };


@@ -18,43 +25,48 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;

-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               devdata: partition@30000 {
-                       label = "devdata";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               partition@40000 {
-                       label = "devconf";
-                       reg = <0x40000 0x30000>;
-                       read-only;
-               };
-
-               partition@70000 {
-                       label = "devlang";
-                       reg = <0x70000 0x40000>;
-                       read-only;
-               };

 
 

-               partition@b0000 {
-                       label = "firmware";
-                       reg = <0xb0000 0x750000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       devdata: partition@30000 {
+                               label = "devdata";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "devconf";
+                               reg = <0x40000 0x30000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               label = "devlang";
+                               reg = <0x70000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@b0000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0xb0000 0x750000>;
+                       };

                };
        };
 
                };
        };
 

-       gpio-leds {
+       leds {

                compatible = "gpio-leds";
 
                compatible = "gpio-leds";
 

-               power {
+               led_power_blue: power {

                        label = "dap-1350:blue:power";
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
                        label = "dap-1350:blue:power";
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };


@@ -70,10 +82,8 @@
                };
        };
 
                };
        };
 

-       gpio-keys-polled {
+       keys {

                compatible = "gpio-keys-polled";
                compatible = "gpio-keys-polled";

-               #address-cells = <1>;
-               #size-cells = <0>;

                poll-interval = <20>;
 
                reset {
                poll-interval = <20>;
 
                reset {