#include "rt3050.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "DCS-930", "ralink,rt3050-soc";
+ compatible = "dlink,dcs-930", "ralink,rt3050-soc";
model = "D-Link DCS-930";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
+ aliases {
+ led-status = &led_status;
};
cfi@1f000000 {
reg = <0x1f000000 0x400000>;
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- partition@50000 {
- label = "kernel";
- reg = <0x50000 0x150000>;
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- partition@150000 {
- label = "rootfs";
- reg = <0x150000 0x2b0000>;
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- partition {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
};
};
wifi {
label = "dcs-930:red:alert";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- power {
+ led_status: status {
label = "dcs-930:green:status";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wps {
label = "dcs-930:blue:wps";
- gpios = <&gpio0 13 1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x101>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
};
reset {
label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
+};
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- esw@10110000 {
- mediatek,portmap = <0x2f>;
- };
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&esw {
+ mediatek,portmap = <0x2f>;
+};
- otg@101c0000 {
- status = "okay";
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};