ramips: specify "firmware" partition format

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DIR-600-B1.dts

diff --git a/target/linux/ramips/dts/DIR-600-B1.dts b/target/linux/ramips/dts/DIR-600-B1.dts
index d45d3c5ccdf417b562e85186f3c5f9a56e159f10..246ee81ef6020f8508506ab6871a33cb89c573a4 100644 (file)
--- a/target/linux/ramips/dts/DIR-600-B1.dts
+++ b/target/linux/ramips/dts/DIR-600-B1.dts
@@ -2,58 +2,71 @@
 
 #include "rt3050.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "DIR-600-B1", "ralink,rt3050-soc";
+       compatible = "dlink,dir-600-b1", "ralink,rt3050-soc";
        model = "D-Link DIR-600 B1";
 
+       aliases {
+               led-boot = &led_status_green;
+               led-failsafe = &led_status_green;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_green;
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               devdata: partition@30000 {
-                       label = "devdata";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "devconf";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       devdata: partition@30000 {
+                               label = "devdata";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "devconf";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
@@ -62,27 +75,27 @@
 
                status {
                        label = "dir-600-b1:amber:status";
-                       gpios = <&gpio0 8 1>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
-               status2 {
+               led_status_green: status2 {
                        label = "dir-600-b1:green:status";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wan {
                        label = "dir-600-b1:amber:wan";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                wan2 {
                        label = "dir-600-b1:green:wan";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                wps {
                        label = "dir-600-b1:blue:wps";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 };