ramips: specify "firmware" partition format

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DIR-620-A1.dts

diff --git a/target/linux/ramips/dts/DIR-620-A1.dts b/target/linux/ramips/dts/DIR-620-A1.dts
index 23f5a5daef9413e7bb07a1a8801bbaa780802d7b..94f1bd6f9c7305580e49e12000542ca076a9e57d 100644 (file)
--- a/target/linux/ramips/dts/DIR-620-A1.dts
+++ b/target/linux/ramips/dts/DIR-620-A1.dts
@@ -9,42 +9,52 @@
        compatible = "dlink,dir-620-a1", "ralink,rt3050-soc";
        model = "D-Link DIR-620 A1";
 
+       aliases {
+               led-boot = &led_status_green;
+               led-failsafe = &led_status_green;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_green;
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
@@ -68,7 +78,7 @@
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
-               status2 {
+               led_status_green: status2 {
                        label = "dir-620-a1:green:status";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };