ramips: fix size-cells on spi nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DIR-860L-B1.dts
index da3f59c933bafb9055671112ce85a68f34fa7427..b6336d87d355aa4d097f162324263fa3c44c8219 100644 (file)
                bootargs = "console=ttyS0,57600";
        };
 
-       palmbus@1E000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x4000>;
-                                       read-only;
-                               };
-
-                               radio: partition@34000 {
-                                       label = "radio";
-                                       reg = <0x34000 0x4000>;
-                                       read-only;
-                               };
-
-                               factory: partition@38000 {
-                                       label = "factory";
-                                       reg = <0x38000 0x8000>;
-                                       read-only;
-                               };
-
-                               partition@40000 {
-                                       label = "defaults";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xfb0000>;
-                               };
-                       };
-               };
-       };
-
-       pcie@1e140000 {
-               status = "okay";
+       gpio-leds {
+               compatible = "gpio-leds";
 
-               pcie0 {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&radio 0x2000>;
-                               mediatek,2ghz = <0>;
-                       };
+               power {
+                       label = "dir-860l-b1:orange:power";
+                       gpios = <&gpio0 13 1>;
                };
 
-               pcie1 {
-                       mt76@1,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&radio 0>;
-                               mediatek,5ghz = <0>;
-                       };
+               power2 {
+                       label = "dir-860l-b1:green:power";
+                       gpios = <&gpio0 15 1>;
                };
-       };
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
-                               ralink,function = "gpio";
-                       };
+               net {
+                       label = "dir-860l-b1:orange:net";
+                       gpios = <&gpio0 14 1>;
                };
-       };
 
-       gpio-leds {
-               compatible = "gpio-leds";
+               net2 {
+                       label = "dir-860l-b1:green:net";
+                       gpios = <&gpio0 16 1>;
+               };
        };
 
        gpio-keys-polled {
                poll-interval = <20>;
        };
 };
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x4000>;
+                       read-only;
+               };
+
+               radio: partition@34000 {
+                       label = "radio";
+                       reg = <0x34000 0x4000>;
+                       read-only;
+               };
+
+               factory: partition@38000 {
+                       label = "factory";
+                       reg = <0x38000 0x8000>;
+                       read-only;
+               };
+
+               partition@40000 {
+                       label = "defaults";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xfb0000>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       pcie0 {
+               mt76@0,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&radio 0x2000>;
+                       mediatek,2ghz = <0>;
+               };
+       };
+
+       pcie1 {
+               mt76@1,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&radio 0>;
+                       mediatek,5ghz = <0>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+                       ralink,function = "gpio";
+               };
+       };
+};