/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
compatible = "linksys,e1700", "ralink,mt7620a-soc";
model = "Linksys E1700";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
};
};
- ethernet@10100000 {
- status = "okay";
- mtd-mac-address = <&factory 0x28>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ gpio-leds {
+ compatible = "gpio-leds";
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
+ led_power: power {
+ label = "e1700:green:power";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "e1700:green:wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
+ };
+};
- mdio-bus {
- status = "okay";
+&spi0 {
+ status = "okay";
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
};
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
};
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
};
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
};
};
};
+};
- gsw@10110000 {
- mediatek,port4 = "gmac";
- mediatek,mt7530 = <1>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
+ mdio-bus {
+ status = "okay";
- reset {
- label = "reset";
- gpios = <&gpio0 1 0>;
- linux,code = <0x198>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
};
- wps {
- label = "wps";
- gpios = <&gpio0 2 0>;
- linux,code = <0x211>;
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
};
- };
- gpio-leds {
- compatible = "gpio-leds";
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
- power {
- label = "e1700:green:power";
- gpios = <&gpio0 10 1>;
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
};
- wan {
- label = "e1700:green:wps";
- gpios = <&gpio0 12 1>;
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
};
};
};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};