ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / F5D8235_V2.dts

diff --git a/target/linux/ramips/dts/F5D8235_V2.dts b/target/linux/ramips/dts/F5D8235_V2.dts
index 64fba022cedb42c70928d6eec5be2e773d74aaad..93725e933699c735eb5684c896de254cabec9f81 100644 (file)
--- a/target/linux/ramips/dts/F5D8235_V2.dts
+++ b/target/linux/ramips/dts/F5D8235_V2.dts
@@ -1,120 +1,146 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "F5D8235_V2", "ralink,rt3052-soc";
+       compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
        model = "Belkin F5D8235 v2";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii";
-                       ralink,gpiomux = "i2c", "spi", "mdio";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
+       aliases {
+               led-boot = &led_router;
+               led-failsafe = &led_router;
+               led-running = &led_router;
+               led-upgrade = &led_router;
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x50000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x790000>;
-               };
-
-               partition@7e0000 {
-                       label = "nvram";
-                       reg = <0x7e0000 0x10000>;
-               };
 
-               factory: partition@7f0000 {
-                       label = "factory";
-                       reg = <0x7f0000 0x10000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x50000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x790000>;
+                       };
+
+                       partition@7e0000 {
+                               label = "nvram";
+                               reg = <0x7e0000 0x10000>;
+                       };
+
+                       factory: partition@7f0000 {
+                               label = "factory";
+                               reg = <0x7f0000 0x10000>;
+                       };
                };
        };
 
-       ethernet@10100000 {
-               status = "okay";
-       };
-
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3f>;
-       };
-
-       wmac@10180000 {
-               status = "okay";
-       };
-
-       otg@101c0000 {
-               status = "okay";
-       };
-
        rtl8366rb {
-               compatible = "rtl8367rb";
-               gpio-sda = <&gpio0 1 0>;
-               gpio-sck = <&gpio0 2 0>;
+               compatible = "realtek,rtl8366rb";
+               gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
+
                internet {
-                       label = "f5d8235v2:blue:internet";
-                       gpios = <&gpio0 5 1>;
+                       label = "f5d8235-v2:blue:internet";
+                       gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
                };
+
                internet2 {
-                       label = "f5d8235v2:amber:internet";
-                       gpios = <&gpio0 6 1>;
+                       label = "f5d8235-v2:amber:internet";
+                       gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
                };
+
                modem {
-                       label = "f5d8235v2:blue:modem";
-                       gpios = <&gpio0 11 1>;
+                       label = "f5d8235-v2:blue:modem";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
+
                modem2 {
-                       label = "f5d8235v2:amber:modem";
-                       gpios = <&gpio0 8 1>;
+                       label = "f5d8235-v2:amber:modem";
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
-               router {
-                       label = "f5d8235v2:blue:router";
-                       gpios = <&gpio0 9 1>;
+
+               led_router: router {
+                       label = "f5d8235-v2:blue:router";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
+
                storage {
-                       label = "f5d8235v2:blue:storage";
-                       gpios = <&gpio0 23 1>;
+                       label = "f5d8235-v2:blue:storage";
+                       gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&otg_port1>;
+                       linux,default-trigger = "usbport";
                };
+
                storage2 {
-                       label = "f5d8235v2:amber:storage";
-                       gpios = <&gpio0 22 1>;
+                       label = "f5d8235-v2:amber:storage";
+                       gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
                };
+
                security {
-                       label = "f5d8235v2:blue:security";
-                       gpios = <&gpio0 13 1>;
+                       label = "f5d8235-v2:blue:security";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
+
                security2 {
-                       label = "f5d8235v2:amber:security";
-                       gpios = <&gpio0 12 1>;
+                       label = "f5d8235-v2:amber:security";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
        };
 };
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&uboot 0x40004>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>;
+};
+
+&esw {
+       ralink,rgmii = <1>;
+       mediatek,portmap = <0x3f>;
+       ralink,fct2 = <0x0002500c>;
+       /*
+        * ext phy base addr 31, rx/tx clock skew 0,
+        * turbo mii off, rgmi 3.3v off, port 5 polling off
+        * port5: enabled, gige, full-duplex, rx/tx-flow-control
+        * port6: enabled, gige, full-duplex, rx/tx-flow-control
+       */
+       ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&uboot 0x40000>;
+};
+
+&otg {
+       status = "okay";
+};