ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / F7C027.dts

diff --git a/target/linux/ramips/dts/F7C027.dts b/target/linux/ramips/dts/F7C027.dts
index 6214c85d03789731af8fd3581f429a06b1478c72..f3bf00e30a32cdf0226b2aef81e3437542767c7c 100644 (file)
--- a/target/linux/ramips/dts/F7C027.dts
+++ b/target/linux/ramips/dts/F7C027.dts
@@ -2,56 +2,64 @@
 
 #include "rt5350.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "F7C027", "ralink,rt5350-soc";
+       compatible = "belkin,f7c027", "ralink,rt5350-soc";
        model = "Belkin F7C027";
 
-       gpio-leds {
+       aliases {
+               led-boot = &led_status_orange;
+               led-failsafe = &led_status_orange;
+               led-running = &led_status_orange;
+               led-upgrade = &led_status_orange;
+       };
+
+       leds {
                compatible = "gpio-leds";
 
                status {
                        label = "f7c027:blue:status";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
 
                power {
                        label = "f7c027:blue:power";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
-               orange {
+               led_status_orange: orange {
                        label = "f7c027:orange:status";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                relay {
                        label = "f7c027:device:relay";
-                       gpios = <&gpio0 13 0>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                top {
-                       label = "top";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       label = "restore";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                power {
                        label = "power";
-                       gpios = <&gpio0 12 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };
 
                sensor {
                        label = "sensor";
-                       gpios = <&gpio0 14 1>;
-                       linux,code = <0x101>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
        };
 };
@@ -60,59 +68,63 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "mx25l12805d";
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x770000>;
-               };
-
-               partition@7c0000 {
-                       label = "firmware2";
-                       reg = <0x7c0000 0x770000>;
-               };
-
-               partition@f30000 {
-                       label = "belkin_settings";
-                       reg = <0xf30000 0xa0000>;
-               };
-
-               partition@fd0000 {
-                       label = "unknown";
-                       reg = <0xfd0000 0x10000>;
-               };
-
-               partition@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x10000>;
-               };
-
-               partition@ff0000 {
-                       label = "user_factory";
-                       reg = <0xff0000 0x10000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x770000>;
+                       };
+
+                       partition@7c0000 {
+                               label = "firmware2";
+                               reg = <0x7c0000 0x770000>;
+                       };
+
+                       partition@f30000 {
+                               label = "belkin_settings";
+                               reg = <0xf30000 0xa0000>;
+                       };
+
+                       partition@fd0000 {
+                               label = "unknown";
+                               reg = <0xfd0000 0x10000>;
+                       };
+
+                       partition@fe0000 {
+                               label = "nvram";
+                               reg = <0xfe0000 0x10000>;
+                       };
+
+                       partition@ff0000 {
+                               label = "user_factory";
+                               reg = <0xff0000 0x10000>;
+                       };
                };
        };
 };