compatible = "fon,fonera20n", "ralink,rt3052-soc";
model = "La Fonera 2.0N";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
- gpio-leds {
+ leds {
compatible = "gpio-leds";
wifi {
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
- power {
+ led_power: power {
label = "fonera20n:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
usb {
label = "fonera20n:orange:usb";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
};
};
- gpio-keys-polled {
+ keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
};
&esw {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
mediatek,portmap = <0x2f>;
port@0 {
compatible = "swconfig,port";
+ reg = <0>;
swconfig,segment = "lan";
swconfig,portmap = <0 4>;
};
port@1 {
compatible = "swconfig,port";
+ reg = <1>;
swconfig,segment = "lan";
swconfig,portmap = <1 3>;
};
port@2 {
compatible = "swconfig,port";
+ reg = <2>;
swconfig,segment = "lan";
swconfig,portmap = <2 2>;
};
port@3 {
compatible = "swconfig,port";
+ reg = <3>;
swconfig,segment = "lan";
swconfig,portmap = <3 1>;
};
port@4 {
compatible = "swconfig,port";
+ reg = <4>;
swconfig,segment = "wan";
swconfig,portmap = <4 0>;
};