/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "FONERA20N", "ralink,rt3052-soc";
+ compatible = "fon,fonera20n", "ralink,rt3052-soc";
model = "La Fonera 2.0N";
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
- gpio-leds {
+ leds {
compatible = "gpio-leds";
+
wifi {
label = "fonera20n:orange:wifi";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
- power {
+
+ led_power: power {
label = "fonera20n:green:power";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
+
usb {
label = "fonera20n:orange:usb";
- gpios = <&gpio0 14 1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
};
};
- gpio-keys-polled {
+ keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
- gpios = <&gpio0 12 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
+
switch {
label = "switch";
- gpios = <&gpio0 13 1>;
- linux,code = <0x101>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
};
};
+};
- ethernet@10100000 {
- status = "okay";
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mediatek,portmap = <0x2f>;
+
+ port@0 {
+ compatible = "swconfig,port";
+ reg = <0>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <0 4>;
};
- esw@10110000 {
- status = "okay";
- ralink,portmap = <0x2f>;
+ port@1 {
+ compatible = "swconfig,port";
+ reg = <1>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <1 3>;
+ };
- port@0 {
- conpatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <0 4>;
- };
- port@1 {
- conpatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <1 3>;
- };
- port@2 {
- conpatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <2 2>;
- };
- port@3 {
- conpatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <3 1>;
- };
- port@4 {
- conpatible = "swconfig,port";
- swconfig,segment = "lan";
- swconfig,portmap = <4 0>;
- };
+ port@2 {
+ compatible = "swconfig,port";
+ reg = <2>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <2 2>;
};
- wmac@10180000 {
- status = "okay";
+ port@3 {
+ compatible = "swconfig,port";
+ reg = <3>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <3 1>;
};
- otg@101c0000 {
- status = "okay";
+ port@4 {
+ compatible = "swconfig,port";
+ reg = <4>;
+ swconfig,segment = "wan";
+ swconfig,portmap = <4 0>;
};
};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};