ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / FONERA20N.dts

diff --git a/target/linux/ramips/dts/FONERA20N.dts b/target/linux/ramips/dts/FONERA20N.dts
index f7039ffa707d98ee610aead9a93f7f4f1ba9a24d..83ce17317497b3b89e1a4d28845a692535bd7c53 100644 (file)
--- a/target/linux/ramips/dts/FONERA20N.dts
+++ b/target/linux/ramips/dts/FONERA20N.dts
@@ -1,91 +1,157 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "FONERA20N", "ralink,rt3052-soc";
+       compatible = "fon,fonera20n", "ralink,rt3052-soc";
        model = "La Fonera 2.0N";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
+               };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
+
                wifi {
                        label = "fonera20n:orange:wifi";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
-               power {
+
+               led_power: power {
                        label = "fonera20n:green:power";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
+
                usb {
                        label = "fonera20n:orange:usb";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&otg_port1>;
+                       linux,default-trigger = "usbport";
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 12 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
+
                switch {
                        label = "switch";
-                       gpios = <&gpio0 13 1>;
-                       linux,code = <0x101>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+                       linux,input-type = <EV_SW>;
                };
        };
+};
 
-       ethernet@10100000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+                       ralink,function = "gpio";
+               };
        };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+       #address-cells = <1>;
+       #size-cells = <0>;
 
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
+       mediatek,portmap = <0x2f>;
+
+       port@0 {
+               compatible = "swconfig,port";
+               reg = <0>;
+               swconfig,segment = "lan";
+               swconfig,portmap = <0 4>;
+       };
+
+       port@1 {
+               compatible = "swconfig,port";
+               reg = <1>;
+               swconfig,segment = "lan";
+               swconfig,portmap = <1 3>;
+       };
+
+       port@2 {
+               compatible = "swconfig,port";
+               reg = <2>;
+               swconfig,segment = "lan";
+               swconfig,portmap = <2 2>;
        };
 
-       wmac@10180000 {
-               status = "okay";
+       port@3 {
+               compatible = "swconfig,port";
+               reg = <3>;
+               swconfig,segment = "lan";
+               swconfig,portmap = <3 1>;
        };
 
-       otg@101c0000 {
-               status = "okay";
+       port@4 {
+               compatible = "swconfig,port";
+               reg = <4>;
+               swconfig,segment = "wan";
+               swconfig,portmap = <4 0>;
        };
 };
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
+};