ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / FREESTATION5.dts
index 442cd268dde03ca1b12e644d7a07577055afb4f0..b924229a7e092e8cf657dcfc4b244b5f565f46ea 100644 (file)
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "FREESTATION5", "ralink,rt3050-soc";
+       compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
        model = "ARC FreeStation5";
 
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
+       };
 
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
+       gpio-export {
+               compatible = "gpio-export";
+
+               /*
+                * Used to enable power-over-ethernet passthrough from port0 to port1.
+                * Disable passthrough by default to prevent accidental equipment damage.
+                */
+               poe {
+                       gpio-export,name = "poe-passthrough";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
+       };
 
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
+       leds {
+               compatible = "gpio-leds";
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
+               /*
+                * The following leds are defined in the ArcOS firmware, but reportedly
+                * not present in the Freestation5 device.
+                */
+               wifi {
+                       label = "freestation5:unknown:wifi";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
-       };
 
-       ethernet@10100000 {
-               status = "okay";
-       };
-
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x01>;
-       };
+               powerg {
+                       label = "freestation5:unknown:powerg";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
 
-       wmac@10180000 {
-               status = "okay";
+               usb {
+                       label = "freestation5:unknown:usb";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+               };
        };
+};
 
-       otg@101c0000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
+};
 
-       poe: gpio-regulator {
-               // Used to enable power-over-ethernet passthrough from port0 to port1.
-               // Disable passthrough by default to prevent accidental equipment damage.
-               compatible = "regulator-gpio";
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
 
-               regulator-name = "poe-power";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
+&esw {
+       mediatek,portmap = <0x01>;
+};
 
-               enable-gpio = <&gpio0 12 0>;
-       };
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
 
-       gpio-leds {
-               compatible = "gpio-leds";
-               // The following leds are defined in the ArcOS firmware, but reportedly
-               // not present in the Freestation5 device.
-               wifi {
-                       label = "freestation:unknown:wifi";
-                       gpios = <&gpio0 7 1>;
-               };
-               powerg {
-                       label = "freestation:unknown:powerg";
-                       gpios = <&gpio0 9 1>;
-               };
-               usb {
-                       label = "freestation:unknown:usb";
-                       gpios = <&gpio0 14 1>;
-               };
-       };
+&otg {
+       status = "okay";
 };