#include <dt-bindings/input/input.h>
/{
- compatible = "gl-inet,gl-mt300n-v2", "ralink,mt7620an-soc";
+ compatible = "glinet,gl-mt300n-v2", "mediatek,mt7628an-soc";
model = "GL-MT300N-V2";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
chosen {
bootargs = "console=ttyS0,115200";
};
reg = <0x0 0x8000000>;
};
- gpio-leds {
+ leds {
compatible = "gpio-leds";
+ led_power: power {
+ label = "gl-mt300n-v2:green:power";
+ default-state = "on";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
wan {
- label = "gl-mt300n-v2:blue:wan";
+ label = "gl-mt300n-v2:green:wan";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
};
- gpio-keys {
+ keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
-
};
&pinctrl {
state_default: pinctrl0 {
gpio {
- ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "i2s";
+ ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
ralink,function = "gpio";
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
};
};
};
+&uart1 {
+ status = "okay";
+};
+
&ehci {
status = "okay";
};