#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "GL-MT750", "ralink,mt7620a-soc";
+ compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";
model = "GL-MT750";
chosen {
bootargs = "console=ttyS0,115200";
};
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
- gpio1: gpio@638 {
- status = "okay";
+ wan {
+ label = "gl-mt750:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
};
- gpio2: gpio@660 {
- status = "okay";
+ lan {
+ label = "gl-mt750:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q128";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x10000>;
- };
- };
+
+ wlan {
+ label = "gl-mt750:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
- sdhci@10130000 {
- status = "okay";
- };
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
- ehci@101c0000 {
- status = "okay";
- };
+ BTN_0 {
+ label = "BTN_0";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
- ohci@101c1000 {
- status = "okay";
+ BTN_1 {
+ label = "BTN_1";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
};
+};
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4000>;
- ralink,port-map = "llllw";
- };
+&gpio0 {
+ status = "okay";
+};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
- pcie@10140000 {
- status = "okay";
+&spi0 {
+ status = "okay";
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
};
- };
- };
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled","ephy","uartf";
- ralink,function = "gpio";
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
};
};
};
+};
- gpio-leds {
- compatible = "gpio-leds";
+&sdhci {
+ status = "okay";
+};
- wan {
- label = "gl-mt750:wan";
- gpios = <&gpio2 0 1>;
- };
+&ehci {
+ status = "okay";
+};
- lan {
- label = "gl-mt750:lan";
- gpios = <&gpio2 1 1>;
- };
+&ohci {
+ status = "okay";
+};
- wlan {
- label = "gl-mt750:wlan";
- gpios = <&gpio3 0 1>;
- };
+ðernet {
+ mtd-mac-address = <&factory 0x4000>;
+ mediatek,portmap = "llllw";
+};
- };
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 13 1>;
- linux,code = <0x198>;
- };
+&pcie {
+ status = "okay";
+};
- BTN_0 {
- label = "BTN_0";
- gpios = <&gpio2 2 1>;
- linux,code = <0x100>;
- };
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};
- BTN_1 {
- label = "BTN_1";
- gpios = <&gpio2 3 1>;
- linux,code = <0x101>;
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","uartf";
+ ralink,function = "gpio";
};
- };
+ };
};