ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / GL-MT750.dts

diff --git a/target/linux/ramips/dts/GL-MT750.dts b/target/linux/ramips/dts/GL-MT750.dts
index 93c38079c23bbe7a7f430c9137bf774b88ab16e7..11133a126a2f833b89087c5fe629483792439237 100644 (file)
--- a/target/linux/ramips/dts/GL-MT750.dts
+++ b/target/linux/ramips/dts/GL-MT750.dts
@@ -2,158 +2,156 @@
 
 #include "mt7620a.dtsi"
 
 
 #include "mt7620a.dtsi"
 

+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+

 / {
 / {

-       compatible = "GL-MT750", "ralink,mt7620a-soc";
+       compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";

        model = "GL-MT750";
 
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
        model = "GL-MT750";
 
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 

-       palmbus@10000000 {
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
+       leds {
+               compatible = "gpio-leds";

 
 

-               gpio1: gpio@638 {
-                       status = "okay";
+               wan {
+                       label = "gl-mt750:wan";
+                       gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;

                };
 
                };
 

-               gpio2: gpio@660 {
-                       status = "okay";
+               lan {
+                       label = "gl-mt750:lan";
+                       gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;

                };
                };

-               
-               gpio3: gpio@688 {
-                     status = "okay";
-                };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "w25q128";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "w25q128";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xf80000>;
-                               };
-
-                               partition@ff0000 {
-                                       label = "art";
-                                       reg = <0xff0000 0x10000>;
-                               };
-                       };
+
+               wlan {
+                       label = "gl-mt750:wlan";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;

                };
        };
 
                };
        };
 

-       sdhci@10130000 {
-               status = "okay";
-       };
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };

 
 

-       ehci@101c0000 {
-               status = "okay";
-       };
+               BTN_0 {
+                       label = "BTN_0";
+                       gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };

 
 

-       ohci@101c1000 {
-               status = "okay";
+               BTN_1 {
+                       label = "BTN_1";
+                       gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_1>;
+               };

        };
        };

+};

 
 

-       ethernet@10100000 {
-               pinctrl-names = "default";
-               pinctrl-0 = <&ephy_pins>;
-               mtd-mac-address = <&factory 0x4000>;
-               ralink,port-map = "llllw";
-       };
+&gpio0 {
+       status = "okay";
+};

 
 

-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+&gpio1 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};

 
 

-       pcie@10140000 {
-               status = "okay";
+&spi0 {
+       status = "okay";

 
 

-               pcie-bridge {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
-                               mediatek,2ghz = <0>;
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;

                        };
                        };

-               };
-       };

 
 

-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "wled","ephy","uartf";
-                               ralink,function = "gpio";
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xf80000>;
+                       };
+
+                       partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x10000>;

                        };
                };
        };
                        };
                };
        };

+};

 
 

-       gpio-leds {
-               compatible = "gpio-leds";
+&sdhci {
+       status = "okay";
+};

 
 

-               wan {
-                       label = "gl-mt750:wan";
-                       gpios = <&gpio2 0 1>;
-               };
+&ehci {
+       status = "okay";
+};

 
 

-               lan {
-                       label = "gl-mt750:lan";
-                       gpios = <&gpio2 1 1>;
-               };
+&ohci {
+       status = "okay";
+};

 
 

-               wlan {
-                       label = "gl-mt750:wlan";
-                       gpios = <&gpio3 0 1>;
-               };
+&ethernet {
+       mtd-mac-address = <&factory 0x4000>;
+       mediatek,portmap = "llllw";
+};

 
 

-       };
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};

 
 

-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 13 1>;
-                       linux,code = <0x198>;
-               };
+&pcie {
+       status = "okay";
+};

 
 

-               BTN_0 {
-                       label = "BTN_0";
-                       gpios = <&gpio2 2 1>;
-                       linux,code = <0x100>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+       };
+};

 
 

-           BTN_1 {
-                       label = "BTN_1";
-                       gpios = <&gpio2 3 1>;
-                       linux,code = <0x101>;
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "wled","ephy","uartf";
+                       ralink,function = "gpio";

                };
                };

-       };
+       };

 };
 };