ramips: fix size-cells on spi nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / HLKRM04.dts

diff --git a/target/linux/ramips/dts/HLKRM04.dts b/target/linux/ramips/dts/HLKRM04.dts
index 0352546bf083f431e305437c1e5bfd4d8beee7a4..2f4e43548f58aebec44fb5fc42a5ca0d87f48dad 100644 (file)
--- a/target/linux/ramips/dts/HLKRM04.dts
+++ b/target/linux/ramips/dts/HLKRM04.dts
@@ -15,78 +15,6 @@
                bootargs = "console=ttyS1,57600";
        };
 
-       palmbus@10000000 {
-               uart@500 {
-                       status = "okay";
-               };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "s25fl064k";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x3b0000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag";
-                               ralink,function = "gpio";
-                       };
-
-                       uartf_gpio {
-                               ralink,group = "uartf";
-                               ralink,function = "gpio uartf";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       ehci@101c0000 {
-               status = "okay";
-       };
-
-       ohci@101c1000 {
-               status = "okay";
-       };
-
        gpio-export {
                compatible = "gpio-export";
                #size-cells = <0>;
@@ -123,3 +51,73 @@
                };
        };
 };
+
+&uart {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80", "s25fl064k";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag";
+                       ralink,function = "gpio";
+               };
+
+               uartf_gpio {
+                       ralink,group = "uartf";
+                       ralink,function = "gpio uartf";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};