/dts-v1/;
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "HPM", "ralink,rt3883-soc";
+ compatible = "omnima,hpm", "ralink,rt3883-soc";
model = "Omnima HPM";
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- compatible = "macronix,mx25l12805d";
- spi-max-frequency = <25000000>;
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "config";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- reg = <0x00050000 0x00fb0000>;
- label = "firmware";
- };
- };
- };
+ aliases {
+ led-status = &led_status;
};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- mtd-mac-address = <&factory 0x28>;
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@4 {
- reg = <4>;
- };
- };
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
+ chosen {
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
- gpios = <&gpio0 14 0>;
- linux,code = <0x198>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
};
};
power {
label = "hpm:orange:power";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
};
- status {
+ led_status: status {
label = "hpm:green:status";
- gpios = <&gpio0 21 1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ default-state = "on";
};
eth {
label = "hpm:green:eth";
- gpios = <&gpio0 20 1>;
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
eth2 {
label = "hpm:red:eth";
- gpios = <&gpio0 18 1>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
wifi {
label = "hpm:green:wifi";
- gpios = <&gpio0 17 1>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "hpm:red:wifi";
- gpios = <&gpio0 19 1>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
};
};
usb0 {
gpio-export,name = "usb0";
gpio-export,output = <1>;
- gpios = <&gpio0 2 0>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};
usb1 {
gpio-export,name = "usb1";
gpio-export,output = <1>;
- gpios = <&gpio0 1 0>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "config";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x00050000 0x00fb0000>;
+ label = "firmware";
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ mtd-mac-address = <&factory 0x28>;
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};