ramips: Fix GB-PC1 cpuclock again

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / HT-TM02.dts

diff --git a/target/linux/ramips/dts/HT-TM02.dts b/target/linux/ramips/dts/HT-TM02.dts
index 640ce76d075e006a1e3cfae3def7df153580e324..a2874725013fda81ea15b95c9ff7eea8911c4747 100644 (file)
--- a/target/linux/ramips/dts/HT-TM02.dts
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -2,8 +2,11 @@
 
 #include "rt5350.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "HT-TM02", "ralink,rt5350-soc";
+       compatible = "hootoo,ht-tm02", "ralink,rt5350-soc";
        model = "HooToo HT-TM02";
 
        gpio-leds {
@@ -11,12 +14,12 @@
 
                wlan {
                        label = "ht-tm02:blue:wlan";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
 
                lan {
                        label = "ht-tm02:green:lan";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -28,15 +31,15 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                modeswitch {
                        label = "modeswitch";
-                       gpios = <&gpio0 14 1>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
        };
 };
@@ -52,8 +55,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
-               reg = <0 0>;
-               linux,modalias = "m25p80", "mx25l6405d";
+               reg = <0>;
                spi-max-frequency = <10000000>;
 
                partition@0 {