ramips: fix size-cells on spi nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / M4-4M.dts
index 2d2ebc4..0502714 100644 (file)
@@ -1,68 +1,14 @@
 /dts-v1/;
 
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
 
 / {
        compatible = "M4", "ralink,rt5350-soc";
        model = "Poray M4";
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "pm25lq032";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "pm25lq032";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x3b0000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
-
-       esw@10110000 {
-               ralink,portmap = <0x2f>;
-               ralink,led_polarity = <1>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
+
                status {
                        label = "m4:blue:status";
                        gpios = <&gpio0 9 1>;
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
        };
+};
 
-       ehci@101c0000 {
-               status = "okay";
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80", "pm25lq032";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
        };
+};
 
-       ohci@101c1000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "uartf";
+                       ralink,function = "gpio";
+               };
        };
 };
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
+       mediatek,led_polarity = <1>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};