ramips: Change all '/include/' clauses to '#include' so preprocessing can

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / MZK-W300NH2.dts

diff --git a/target/linux/ramips/dts/MZK-W300NH2.dts b/target/linux/ramips/dts/MZK-W300NH2.dts
index cdd78b5867df07cfc4e90d866aad908b22559971..c953805f3f3d3d06df600829e7f5bd1ba611a605 100644 (file)
--- a/target/linux/ramips/dts/MZK-W300NH2.dts
+++ b/target/linux/ramips/dts/MZK-W300NH2.dts
@@ -1,36 +1,23 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "MZK-W300NH2", "ralink,rt3052-soc";
        model = "Planex MZK-W300NH2";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite", "mdio", "sdram", "rgmii";
-                       ralink,gpiomux = "i2c", "spi", "jtag";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -67,26 +54,32 @@
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
+               mediatek,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                power {
-                       label = "mzkw300nh2:green:power";
+                       label = "mzk-w300nh2:green:power";
                        gpios = <&gpio0 9 1>;
                };
+
                wlan {
-                       label = "mzkw300nh2:amber:wlan";
+                       label = "mzk-w300nh2:amber:wlan";
                        gpios = <&gpio0 14 1>;
                };
+
                wps {
-                       label = "mzkw300nh2:amber:wps";
+                       label = "mzk-w300nh2:amber:wps";
                        gpios = <&gpio0 11 1>;
                };
        };
@@ -96,24 +89,23 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 12 1>;
                        linux,code = <0x211>;
                };
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 0 1>;
                        linux,code = <0x198>;
                };
+
                rt {
                        label = "rt";
                        gpios = <&gpio0 13 1>;
                        linux,code = <0x100>;
                };
        };
-
-       wmac@10180000 {
-               status = "okay";
-       };
 };