ramips: fix size-cells on spi nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / PBR-M1.dts

diff --git a/target/linux/ramips/dts/PBR-M1.dts b/target/linux/ramips/dts/PBR-M1.dts
index 76eae931a5f080eb6a6ff543c618fde334935956..708c7c52ddf6e07882ba5f7bc443ea080292b568 100644 (file)
--- a/target/linux/ramips/dts/PBR-M1.dts
+++ b/target/linux/ramips/dts/PBR-M1.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "mt7621.dtsi"
+#include "mt7621.dtsi"
 
 / {
        compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
@@ -15,115 +15,50 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       sdhci@10130000 {
-               status = "okay";
-       };
-
-       palmbus@1E000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "w25q256";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xfb0000>;
-                               };
-
-                       };
-               };
-
-               i2c@900 {
+       palmbus: palmbus@1E000000 {
+               i2c: i2c@900 {
                        compatible = "ralink,i2c-mt7621";
                        reg = <0x900 0x100>;
-
                        #address-cells = <1>;
                        #size-cells = <0>;
-
                        pinctrl-names = "default";
                        pinctrl-0 = <&i2c_pins>;
-
                        status = "okay";
 
                        pcf8563: rtc@51 {
                                status = "okay";
                                compatible = "nxp,pcf8563";
                                reg = <0x51>;
-            };
-        };
-    };
-
-       pcie@1e140000 {
-               status = "okay";
-
-               pcie0 {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x0000>;
-                               mediatek,2ghz = <0>;
-                       };
-               };
-
-               pcie1 {
-                       mt76@1,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
-                               mediatek,5ghz = <0>;
                        };
                };
        };
 
-       ethernet@1e100000 {
-               mtd-mac-address = <&factory 0xe000>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
-               buzzer {
-                       label = "pbr-m1:buzzer";
-                       gpios = <&gpio0 27 1>;
-               };
-
                power {
-                       label = "pbr-m1:green:power";
-                       gpios = <&gpio0 25 1>;
+                       label = "pbr-m1:blue:power";
+                       gpios = <&gpio0 31 1>;
                };
 
                sys {
-                       label = "pbr-m1:green:sys";
-                       gpios = <&gpio0 24 1>;
+                       label = "pbr-m1:blue:sys";
+                       gpios = <&gpio1 0 1>;
                };
 
                internet {
-                       label = "pbr-m1:green:internet";
-                       gpios = <&gpio0 23 1>;
+                       label = "pbr-m1:blue:internet";
+                       gpios = <&gpio0 29 1>;
+               };
+
+               wlan2g {
+                       label = "pbr-m1:blue:wlan2g";
+                       gpios = <&gpio1 1 1>;
+               };
+
+               wlan5g {
+                       label = "pbr-m1:blue:wlan5g";
+                       gpios = <&gpio0 28 1>;
                };
        };
 
@@ -132,6 +67,7 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 18 1>;
@@ -139,12 +75,114 @@
                };
        };
 
-       pinctrl {
-               state_default: pinctrl0 {
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               power_usb2 {
+                       gpio-export,name = "power_usb2";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 22 0>;
+               };
+
+               power_usb3 {
+                       gpio-export,name = "power_usb3";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 25 0>;
+               };
+
+               power_sata {
+                       gpio-export,name = "power_sata";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 27 0>;
+               };
+       };
+
+       beeper: beeper {
+               compatible = "gpio-beeper";
+               gpios = <&gpio0 26 1>;
+       };
+};
+
+&sdhci {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdhci_pins>;
+};
+
+&xhci {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xfb0000>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       pcie0 {
+               mt76@0,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&factory 0x8000>;
+                       mediatek,2ghz = <0>;
+               };
+       };
+
+       pcie1 {
+               mt76@1,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&factory 0x0000>;
+                       mediatek,5ghz = <0>;
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0xe000>;
+};
+
+
+
+&pinctrl {
+       state_default: pinctrl0 {
                gpio {
-                               ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
-                               ralink,function = "gpio";
-                       };
+                       ralink,group = "wdt", "rgmii2", "jtag", "mdio";
+                       ralink,function = "gpio";
                };
        };
 };