ramips: fix dtc warnings

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / PSG1208.dts

diff --git a/target/linux/ramips/dts/PSG1208.dts b/target/linux/ramips/dts/PSG1208.dts
index c3be8ef7cba3d5756b9d4a73e9cea43fc7d89e5b..16c60371fe10aa3bfc3483b2058b7044395ff7f7 100644 (file)
--- a/target/linux/ramips/dts/PSG1208.dts
+++ b/target/linux/ramips/dts/PSG1208.dts
@@ -1,114 +1,115 @@
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "PSG1208", "ralink,mt7620a-soc";
+       compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
        model = "Phicomm PSG1208";
 
-       palmbus@10000000 {
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
+       aliases {
+               led-status = &led_wps;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
 
-               gpio3: gpio@688 {
-                       status = "okay";
+               led_wps: wps {
+                       label = "psg1208:white:wps";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
 
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "en25q64";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@20000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@30000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@40000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
+               wlan {
+                       label = "psg1208:white:wlan2g";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
-                               ralink,function = "gpio";
-                       };
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       ethernet@10100000 {
-               pinctrl-names = "default";
-               pinctrl-0 = <&ephy_pins>;
-               mtd-mac-address = <&factory 0x4>;
-               mediatek,portmap = "llllw";
-       };
+&gpio1 {
+       status = "okay";
+};
 
-       pcie@10140000 {
-               status = "okay";
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
 
-               pcie-bridge {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
-                               mediatek,2ghz = <0>;
-                       };
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
                };
-       };
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+               partition@20000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
 
-       gpio-leds {
-               compatible = "gpio-leds";
+               factory: partition@30000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
 
-               wan {
-                       label = "psg1208:white:wps";
-                       gpios = <&gpio1 15 1>;
+               partition@40000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
                };
+       };
+};
 
-               wlan {
-                       label = "psg1208:white:wlan2g";
-                       gpios = <&gpio3 0 1>;
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "spi refclk", "wled";
+                       ralink,function = "gpio";
                };
        };
+};
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
+&ethernet {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ephy_pins>;
+       mtd-mac-address = <&factory 0x4>;
+       mediatek,portmap = "llllw";
+};
 
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <0x198>;
-               };
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
 };
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};