ramips: move partitions into partition table node

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / RP-N53.dts

diff --git a/target/linux/ramips/dts/RP-N53.dts b/target/linux/ramips/dts/RP-N53.dts
index 39347b973c54dba04fec462be2d903ad7bb9a86a..d46d853ae6aa9827532a4b3a7decc433e9437e92 100644 (file)
--- a/target/linux/ramips/dts/RP-N53.dts
+++ b/target/linux/ramips/dts/RP-N53.dts
@@ -1,122 +1,40 @@
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
        compatible = "asus,rp-n53", "ralink,mt7620a-soc";
        model = "Asus RP-N53";
 
-       palmbus@10000000 {
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
-
-               i2c@900 {
-                       status = "okay";
-               };
-
-               i2s@a00 {
-                       status = "okay";
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&pcm_i2s_pins>;
-               };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "mx25l6405d";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
-               };
-
-               pcm@2000 {
-                       status = "okay";
-               };
-
-               gdma@2800 {
-                       status = "okay";
-               };
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "mdio", "rgmii1";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       gsw@10110000 {
-               ralink,port4 = "ephy";
-               pinctrl-names = "default";
-               pinctrl-0 = <&ephy_pins>;
-       };
-
-       pcie@10140000 {
-               status = "okay";
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                touch {
                        label = "touch";
-                       gpios = <&gpio1 0 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio1 1 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio1 2 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
 
                audio {
                        label = "audio";
-                       gpios = <&gpio1 3 0>;
-                       linux,code = <0x101>;
+                       gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+                       linux,code = <BTN_1>;
                };
        };
 
@@ -125,42 +43,135 @@
 
                backlight {
                        label = "rp-n53:white:back";
-                       gpios = <&gpio1 4 1>;
+                       gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
                };
 
                wifi0 {
                        label = "rp-n53:blue:5g3";
-                       gpios = <&gpio1 5 1>;
+                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
                };
 
                wifi1 {
                        label = "rp-n53:blue:5g2";
-                       gpios = <&gpio1 6 1>;
+                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
                };
 
                wifi2 {
                        label = "rp-n53:blue:5g1";
-                       gpios = <&gpio1 7 1>;
+                       gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
                };
 
                wifi3 {
                        label = "rp-n53:blue:wifi";
-                       gpios = <&gpio1 8 1>;
+                       gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
                };
 
                wifi4 {
                        label = "rp-n53:blue:2g1";
-                       gpios = <&gpio1 9 1>;
+                       gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
                };
 
                wifi5 {
                        label = "rp-n53:blue:2g2";
-                       gpios = <&gpio1 10 1>;
+                       gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
                };
 
                wifi6 {
                        label = "rp-n53:blue:2g3";
-                       gpios = <&gpio1 11 1>;
+                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&i2c {
+       status = "okay";
+};
+
+&i2s {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
        };
 };
+
+&pcm {
+       status = "okay";
+};
+
+&gdma {
+       status = "okay";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "mdio", "rgmii1";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&gsw {
+       mediatek,port4 = "ephy";
+       pinctrl-names = "default";
+       pinctrl-0 = <&ephy_pins>;
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "pci1814,5592";
+               reg = <0x0000 0 0 0 0>;
+               ralink,2ghz = <0>;
+               ralink,mtd-eeprom = <&factory 0x8000>;
+       };
+};