ramips: dts: Unify naming of gpio-keys nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / RT-N10-PLUS.dts

diff --git a/target/linux/ramips/dts/RT-N10-PLUS.dts b/target/linux/ramips/dts/RT-N10-PLUS.dts
index 2f070b74190868fe0b676971ad32e1d1983857cf..c4b154b8b8ecc3a377ea7071e921abab5af06d9a 100644 (file)
--- a/target/linux/ramips/dts/RT-N10-PLUS.dts
+++ b/target/linux/ramips/dts/RT-N10-PLUS.dts
@@ -1,91 +1,93 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
+       compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
        model = "Asus RT-N10+";
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
+       aliases {
+               led-boot = &led_wps;
+               led-failsafe = &led_wps;
+               led-running = &led_wps;
+               led-upgrade = &led_wps;
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
 
-               partition@30000 {
-                       label = "devdata";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               partition@40000 {
-                       label = "devconf";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
-               };
-       };
+                       partition@30000 {
+                               label = "devdata";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
 
-       ethernet@10100000 {
-               status = "okay";
-       };
+                       devconf: partition@40000 {
+                               label = "devconf";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
 
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3e>;
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
+               };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
-               wps {
-                       label = "asus:green:wps";
-                       gpios = <&gpio0 14 1>;
+
+               led_wps: wps {
+                       label = "rt-n10-plus:green:wps";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
+
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
+};
 
-       wmac@10180000 {
-               status = "okay";
-       };
+&ethernet {
+       mtd-mac-address = <&devconf 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&devconf 0>;
 };