ramips: Fix WiFi after 5f7396ebef09b224edf08b0bda113613a42f0928

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / SAP-G3200U3.dts

diff --git a/target/linux/ramips/dts/SAP-G3200U3.dts b/target/linux/ramips/dts/SAP-G3200U3.dts
index 343742b5dd7348a75f63a439a79ffef2966b72bf..912da1cd6195d90729ea80b2718f8f466929cd07 100644 (file)
--- a/target/linux/ramips/dts/SAP-G3200U3.dts
+++ b/target/linux/ramips/dts/SAP-G3200U3.dts
@@ -2,8 +2,11 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+       compatible = "storylink,sap-g3200u3", "mediatek,mt7621-soc";
        model = "STORYLiNK SAP-G3200U3";
 
        memory@0 {
@@ -15,82 +18,12 @@
                bootargs = "console=ttyS0,57600";
        };
 
-       palmbus@1E000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "en25q64";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x1000>;
-                                       read-only;
-                               };
-
-                               partition@31000 {
-                                       label = "config";
-                                       reg = <0x31000 0xf000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
-               };
-       };
-
-       pcie@1e140000 {
-               status = "okay";
-
-               pcie0 {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
-                               mediatek,2ghz = <0>;
-                       };
-               };
-
-               pcie1 {
-                       mt76@1,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x0000>;
-                               mediatek,5ghz = <0>;
-                       };
-               };
-       };
-
-       ethernet@1e100000 {
-               mtd-mac-address = <&factory 0xe006>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
                usb {
                        label = "sap-g3200u3:green:usb";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -102,23 +35,87 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 16 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio0 14 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };
        };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x1000>;
+                       read-only;
+               };
+
+               partition@31000 {
+                       label = "config";
+                       reg = <0x31000 0xf000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       pcie0 {
+               mt76@0,0 {
+                       mediatek,mtd-eeprom = <&factory 0x8000>;
+                       ieee80211-freq-limit = <5000000 6000000>;
+               };
+       };
+
+       pcie1 {
+               mt76@1,0 {
+                       mediatek,mtd-eeprom = <&factory 0x0000>;
+                       ieee80211-freq-limit = <2400000 2500000>;
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0xe006>;
+};
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "uart3", "jtag";
-                               ralink,function = "gpio";
-                       };
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "uart3", "jtag";
+                       ralink,function = "gpio";
                };
        };
 };