ramips: add support for Netgear R6120

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / Timecloud.dts

diff --git a/target/linux/ramips/dts/Timecloud.dts b/target/linux/ramips/dts/Timecloud.dts
index 535469a8a003c46b3b30e91158614be8be311211..16f2326f5ae1bcdbde8052748933775597f92c3c 100644 (file)
--- a/target/linux/ramips/dts/Timecloud.dts
+++ b/target/linux/ramips/dts/Timecloud.dts
@@ -2,11 +2,17 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "thunder,timecloud", "mediatek,mt7621-soc";
        model = "Thunder Timecloud";
 
+       aliases {
+               led-status = &led_statuso;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x10000000>;
@@ -21,31 +27,29 @@
 
                statw {
                        label = "timecloud:white:status";
-                       gpios = <&gpio0 7 0>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
                };
 
-               stato {
+               led_statuso: stato {
                        label = "timecloud:orange:status";
-                       gpios = <&gpio0 8 0>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
                };
 
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
 
                BTN_0 {
                        label = "BTN_0";
-                       gpios = <&gpio0 4 1>;
+                       gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                };
        };
@@ -62,34 +66,38 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xfb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
                };
        };
 };