/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-1166D";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "en25q64";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
- };
-
- gsw@10110000 {
- ralink,port4 = "ephy";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 32768>;
- mediatek,2ghz = <0>;
- };
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
+
power {
- label = "buffalo:red:power";
+ label = "whr-1166d:red:power";
gpios = <&gpio0 7 1>;
};
- status {
- label = "buffalo:green:status";
+
+ wifi {
+ label = "whr-1166d:green:wifi";
gpios = <&gpio0 8 1>;
};
+
power2 {
- label = "buffalo:green:power";
+ label = "whr-1166d:green:power";
gpios = <&gpio0 9 1>;
};
- status2 {
- label = "buffalo:orange:status";
+
+ wifi2 {
+ label = "whr-1166d:orange:wifi";
gpios = <&gpio0 10 1>;
};
+
internet {
- label = "buffalo:green:internet";
+ label = "whr-1166d:green:internet";
gpios = <&gpio2 17 1>;
};
+
router {
- label = "buffalo:green:router";
+ label = "whr-1166d:orange:router";
gpios = <&gpio2 18 1>;
};
+
router2 {
- label = "buffalo:orange:router";
+ label = "whr-1166d:green:router";
gpios = <&gpio2 19 1>;
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x198>;
};
+
aoss {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x211>;
};
+
ap {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
+
bridge {
label = "bridge";
gpios = <&gpio2 15 1>;
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 32768>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};