ramips: fix size-cells on spi nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WHR-1166D.dts

diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts
index 960c3e176c632a903ef124d2b1a2b8136ee3583c..0c0f62728c7b42f493784b8849a0a7764e8e5e30 100644 (file)
--- a/target/linux/ramips/dts/WHR-1166D.dts
+++ b/target/linux/ramips/dts/WHR-1166D.dts
@@ -1,131 +1,46 @@
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
 
 / {
        compatible = "ralink,mt7620a-soc";
        model = "Buffalo WHR-1166D";
 
-       palmbus@10000000 {
-               gpio2: gpio@660 {
-                       status = "okay";
-               };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "en25q64";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "mx25l6405d";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xfb0000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uartf", "wled", "nd_sd";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               pinctrl-names = "default";
-               pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
-               port@5 {
-                       status = "okay";
-                       phy-handle = <&phy5>;
-                       phy-mode = "rgmii";
-               };
-
-               mdio-bus {
-                       status = "okay";
-
-                       phy5: ethernet-phy@5 {
-                               reg = <5>;
-                               phy-mode = "rgmii";
-                       };
-               };
-       };
-
-       gsw@10110000 {
-               ralink,port4 = "ephy";
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       pcie@10140000 {
-               status = "okay";
-
-               pcie-bridge {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 32768>;
-                               mediatek,2ghz = <0>;
-                       };
-               };
-       };
-       
        gpio-leds {
                compatible = "gpio-leds";
+
                power {
-                       label = "buffalo:red:power";
+                       label = "whr-1166d:red:power";
                        gpios = <&gpio0 7 1>;
                };
-               status {
-                       label = "buffalo:green:status";
+
+               wifi {
+                       label = "whr-1166d:green:wifi";
                        gpios = <&gpio0 8 1>;
                };
+
                power2 {
-                       label = "buffalo:green:power";
+                       label = "whr-1166d:green:power";
                        gpios = <&gpio0 9 1>;
                };
-               status2 {
-                       label = "buffalo:orange:status";
+
+               wifi2 {
+                       label = "whr-1166d:orange:wifi";
                        gpios = <&gpio0 10 1>;
                };
+
                internet {
-                       label = "buffalo:green:internet";
+                       label = "whr-1166d:green:internet";
                        gpios = <&gpio2 17 1>;
                };
+
                router {
-                       label = "buffalo:green:router";
+                       label = "whr-1166d:orange:router";
                        gpios = <&gpio2 18 1>;
                };
+
                router2 {
-                       label = "buffalo:orange:router";
+                       label = "whr-1166d:green:router";
                        gpios = <&gpio2 19 1>;
                };
        };
@@ -135,25 +50,121 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
-               s1 {
+
+               reset {
                        label = "reset";
                        gpios = <&gpio2 12 1>;
-                       linux,code = <0x100>;
+                       linux,code = <0x198>;
                };
-               s2 {
+
+               aoss {
                        label = "aoss";
                        gpios = <&gpio2 13 1>;
-                       linux,code = <0x101>;
+                       linux,code = <0x211>;
                };
-               s3 {
+
+               ap {
                        label = "ap";
                        gpios = <&gpio2 14 1>;
-                       linux,code = <0x102>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
                };
-               s4 {
+
+               bridge {
                        label = "bridge";
                        gpios = <&gpio2 15 1>;
-                       linux,code = <0x103>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+       };
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80", "mx25l6405d";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xfb0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf", "wled", "nd_sd";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+       port@5 {
+               status = "okay";
+               phy-handle = <&phy5>;
+               phy-mode = "rgmii";
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy5: ethernet-phy@5 {
+                       reg = <5>;
+                       phy-mode = "rgmii";
+               };
+       };
+};
+
+&gsw {
+       mediatek,port4 = "ephy";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+       status = "okay";
+
+       pcie-bridge {
+               mt76@0,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&factory 32768>;
+                       mediatek,2ghz = <0>;
                };
        };
 };