#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "ralink,mt7620a-soc";
+ compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
model = "Buffalo WHR-300HP2";
+ aliases {
+ led-status = &led_power_green;
+ };
+
gpio-leds {
compatible = "gpio-leds";
power {
label = "whr-300hp2:red:power";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
wifi {
label = "whr-300hp2:green:wifi";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- power2 {
+ led_power_green: power2 {
label = "whr-300hp2:green:power";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "whr-300hp2:orange:wifi";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
internet {
label = "whr-300hp2:green:internet";
- gpios = <&gpio2 17 1>;
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
};
router {
label = "whr-300hp2:green:router";
- gpios = <&gpio2 18 1>;
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
};
router2 {
label = "whr-300hp2:orange:router";
- gpios = <&gpio2 19 1>;
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio2 12 1>;
- linux,code = <0x198>;
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
- gpios = <&gpio2 13 1>;
- linux,code = <0x211>;
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
- gpios = <&gpio2 14 1>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
bridge {
label = "bridge";
- gpios = <&gpio2 15 1>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
- linux,modalias = "m25p80", "s25fl064k";
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
};
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
-
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
};