ramips: add support for D-Link DAP-1522 A1

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WHR-600D.dts

diff --git a/target/linux/ramips/dts/WHR-600D.dts b/target/linux/ramips/dts/WHR-600D.dts
index 7d26f32b973e323b0de3d504a354b58a03674a79..611a23d9bbbca5b9fcae21a364c9ff489e262da2 100644 (file)
--- a/target/linux/ramips/dts/WHR-600D.dts
+++ b/target/linux/ramips/dts/WHR-600D.dts
@@ -2,8 +2,11 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "ralink,mt7620a-soc";
+       compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
        model = "Buffalo WHR-600D";
 
        gpio-leds {
@@ -11,37 +14,37 @@
 
                power {
                        label = "whr-600d:red:power";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
 
                wifi {
                        label = "whr-600d:green:wifi";
-                       gpios = <&gpio0 8 1>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
                power2 {
                        label = "whr-600d:green:power";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wifi2 {
                        label = "whr-600d:orange:wifi";
-                       gpios = <&gpio0 10 1>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
 
                internet {
                        label = "whr-600d:green:internet";
-                       gpios = <&gpio2 17 1>;
+                       gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
                };
 
                router {
                        label = "whr-600d:green:router";
-                       gpios = <&gpio2 18 1>;
+                       gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
                };
 
                router2 {
                        label = "whr-600d:orange:router";
-                       gpios = <&gpio2 19 1>;
+                       gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -53,28 +56,28 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio2 12 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                aoss {
                        label = "aoss";
-                       gpios = <&gpio2 13 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                ap {
                        label = "ap";
-                       gpios = <&gpio2 14 1>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>; /* EV_SW */
+                       gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
 
                bridge {
                        label = "bridge";
-                       gpios = <&gpio2 15 1>;
-                       linux,code = <0x100>;
-                       linux,input-type = <5>; /* EV_SW */
+                       gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
                };
        };
 };
@@ -91,7 +94,6 @@
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "mx25l6405d";
                spi-max-frequency = <10000000>;
 
                partition@0 {
@@ -145,4 +147,12 @@
 
 &pcie {
        status = "okay";
+
+       pcie-bridge {
+               wifi@1814,5592 {
+                       compatible = "pci1814,5592";
+                       reg = <0x0000 0 0 0 0>;
+                       ralink,mtd-eeprom = <&factory 0x8000>;
+               };
+       };
 };