ramips: fix whitespace and comment issues in dts

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WIZFI630A.dts

diff --git a/target/linux/ramips/dts/WIZFI630A.dts b/target/linux/ramips/dts/WIZFI630A.dts
index f2818ce9df8a7debaff682edfcd3cc1120d8e14f..8ee457c4ba24ac750e9d8b3152ac9c0513f1f601 100644 (file)
--- a/target/linux/ramips/dts/WIZFI630A.dts
+++ b/target/linux/ramips/dts/WIZFI630A.dts
@@ -1,180 +1,150 @@
 /dts-v1/;
 
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "wizfi630a", "ralink,rt5350-soc";
+       compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
        model = "WIZnet WizFi630A";
 
-       chosen {
-               bootargs = "console=ttyS1,115200";
-       };
-
-       palmbus@10000000 {
-               gpio1: gpio@660 {
-                       status = "okay";
-               };
-
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "w25q128";
-                               reg = <0>;
-                               linux,modalias = "m25p80", "w25q128";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "uboot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "uboot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xfb0000>;
-                               };
-                       };
-               };
-
-               uart@500 {
-                       compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
-                       reg = <0x500 0x100>;
-                       resets = <&rstctrl 12>;
-                       reset-names = "uart";
-                       interrupt-parent = <&intc>;
-                       interrupts = <5>;
-                       reg-shift = <2>;
-                       status = "okay";
-               };
-
-               uartlite@c00 {
-                       compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
-                       reg = <0xc00 0x100>;
-                       resets = <&rstctrl 19>;
-                       reset-names = "uartl";
-                       interrupt-parent = <&intc>;
-                       interrupts = <12>;
-                       reg-shift = <2>;
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uartlite_pins>;
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag" ;
-                               ralink,function = "gpio";
-                       };
-               };
-
-               uartf_gpio_pins: uartf_gpio {
-                       uartf_gpio {
-                               ralink,group = "uartf";
-                               ralink,function = "uartf";
-                       };
-               };
-
-               uartlite_pins: uartlite {
-                       uart {
-                               ralink,group = "uartlite";
-                               ralink,function = "uartlite";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
-
-       esw@10110000 {
-               ralink,portmap = <0x17>;
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       ehci@101c0000 {
-               status = "okay";
-       };
-
-       ohci@101c1000 {
-               status = "okay";
+       aliases {
+               led-status = &led_run;
        };
 
-       gpio-export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
+       chosen {
+               bootargs = "console=ttyS1,115200";
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               run {
+               led_run: run {
                        label = "wizfi630a::run";
-                       gpios = <&gpio0 1 1>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                };
 
                wps {
                        label = "wizfi630a::wps";
-                       gpios = <&gpio0 20 1>;
+                       gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
                };
 
                uart1 {
                        label = "wizfi630a::uart1";
-                       gpios = <&gpio0 18 1>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                };
 
                uart2 {
                        label = "wizfi630a::uart2";
-                       gpios = <&gpio0 21 1>;
+                       gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 17 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
-               
+
                scm1 {
                        label = "SCM1";
-                       gpios = <&gpio0 19 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
 
                scm2 {
                        label = "SCM2";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0x101>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_1>;
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       #size-cells = <1>;
+                       label = "uboot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       #size-cells = <1>;
+                       label = "uboot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       #size-cells = <1>;
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       #size-cells = <1>;
+                       label = "firmware";
+                       reg = <0x50000 0xfb0000>;
                };
        };
 };
+
+&uart {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&uartf_pins>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag" ;
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x17>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};