ramips: dts: Unify naming of gpio-led nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WL-351.dts

diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts
index fd30160692abe605de5007d42b0cd55f4ee8b384..1b31bda7361f6abdef0d543f0b5c9cf1094a65e4 100644 (file)
--- a/target/linux/ramips/dts/WL-351.dts
+++ b/target/linux/ramips/dts/WL-351.dts
@@ -1,113 +1,133 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "WL-351", "ralink,rt3052-soc";
+       compatible = "sitecom,wl-351", "ralink,rt3052-soc";
        model = "Sitecom WL-351 v1 002";
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
 
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
 
-       esw@10110000 {
-               ralink,portmap = <0x3f>;
-               ralink,fct2 = <0x0002500c>;
-               /*
-                * ext phy base addr 31, rx/tx clock skew 0,
-                * turbo mii off, rgmi 3.3v off, port 5 polling off
-                * port5: enabled, gige, full-duplex, rx/tx-flow-control
-                * port6: enabled, gige, full-duplex, rx/tx-flow-control
-               */
-               ralink,fpa2 = <0x1f003fff>;
-       };
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
 
-       otg@101c0000 {
-               status = "okay";
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
+               };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
-               power {
+
+               led_power: power {
                        label = "wl-351:amber:power";
-                       gpios = <&gpio0 8 1>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
+
                unpopulated {
                        label = "wl-351:amber:unpopulated";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
+
                unpopulated2 {
                        label = "wl-351:blue:unpopulated";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
+
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
        rtl8366rb {
-               compatible = "rtl8367rb";
-               gpio-sda = <&gpio0 1 0>;
-               gpio-sck = <&gpio0 2 0>;
+               compatible = "realtek,rtl8366rb";
+               gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
 };
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>;
+};
+
+&esw {
+       ralink,rgmii = <1>;
+       mediatek,portmap = <0x3f>;
+       ralink,fct2 = <0x0002500c>;
+       /*
+        * ext phy base addr 31, rx/tx clock skew 0,
+        * turbo mii off, rgmi 3.3v off, port 5 polling off
+        * port5: enabled, gige, full-duplex, rx/tx-flow-control
+        * port6: enabled, gige, full-duplex, rx/tx-flow-control
+       */
+       ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
+};