ramips: fix size-cells on spi nodes

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WL-351.dts

diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts
index bc122943d4ce271762e98091c9dcc1886e15fd67..ecda696732c30f35c3d6610fd99407f5e4085f7f 100644 (file)
--- a/target/linux/ramips/dts/WL-351.dts
+++ b/target/linux/ramips/dts/WL-351.dts
@@ -1,24 +1,14 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "WL-351", "ralink,rt3052-soc";
        model = "Sitecom WL-351 v1 002";
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -48,32 +38,19 @@
                };
        };
 
-       esw@10110000 {
-               ralink,portmap = <0x3f>;
-               ralink,fct2 = <0x0002500c>;
-               /*
-                * ext phy base addr 31, rx/tx clock skew 0,
-                * turbo mii off, rgmi 3.3v off, port 5 polling off
-                * port5: enabled, gige, full-duplex, rx/tx-flow-control
-                * port6: enabled, gige, full-duplex, rx/tx-flow-control
-               */
-               ralink,fpa2 = <0x1f003fff>;
-       };
-
-       otg@101c0000 {
-               status = "okay";
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
+
                power {
                        label = "wl-351:amber:power";
                        gpios = <&gpio0 8 1>;
                };
+
                unpopulated {
                        label = "wl-351:amber:unpopulated";
                        gpios = <&gpio0 12 1>;
                };
+
                unpopulated2 {
                        label = "wl-351:blue:unpopulated";
                        gpios = <&gpio0 13 1>;
@@ -85,11 +62,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 1>;
@@ -98,8 +77,41 @@
        };
 
        rtl8366rb {
-               compatible = "rtl8367rb";
+               compatible = "rtl8366rb";
                gpio-sda = <&gpio0 1 0>;
                gpio-sck = <&gpio0 2 0>;
        };
 };
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x3f>;
+       ralink,fct2 = <0x0002500c>;
+       /*
+        * ext phy base addr 31, rx/tx clock skew 0,
+        * turbo mii off, rgmi 3.3v off, port 5 polling off
+        * port5: enabled, gige, full-duplex, rx/tx-flow-control
+        * port6: enabled, gige, full-duplex, rx/tx-flow-control
+       */
+       ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
+};